Westward
Westward 54PR40 Crowfoot Socket Wrench 3/4 inch
Alloy-steel crowfoot socket with a 3/8-inch drive and 3/4-inch head for tight fasteners
- Typesocket
- Alloy steel construction resists wear and deformation
- Chrome finish protects against corrosion during use
- 3/8 inch drive fits standard ratchets and extensions
- 3/4 inch head engages common fastener sizes
- 39 1/8 inch overall width reaches confined or deep locations
3/4 inch Crowfoot Socket Wrench
The Westward 54PR40 is a crowfoot socket wrench built from alloy steel with a chrome finish. It accepts a 3/8 inch drive and fits a 3/4 inch fastener head. The overall length is 1 7/8 inches and the overall width is 39 1/8 inches. It is a new hand tool suited for mechanics and technicians working in tight clearances where a standard socket cannot reach.
3/8 inch drive compatibility limit
This wrench operates on a 3/8 inch square drive, so the torque you can apply is limited by that drive size and the strength of your ratchet or breaker bar. The crowfoot geometry changes the effective leverage compared to a straight socket, so the reading on a torque wrench will differ from the actual torque at the fastener. No nonsparking, non-magnetic or insulated properties are present.
Clearance and drive check before ordering
Verify that your ratchet, breaker bar or torque wrench has a 3/8 inch drive to match this crowfoot. Confirm the 39 1/8 inch overall width and 1 7/8 inch length will fit the access space around the 3/4 inch fastener you intend to turn. The tool carries a California Proposition 65 warning for cancer and reproductive harm.
Highlights
- Alloy steel construction resists wear and deformation
- Chrome finish protects against corrosion during use
- 3/8 inch drive fits standard ratchets and extensions
- 3/4 inch head engages common fastener sizes
- 39 1/8 inch overall width reaches confined or deep locations
Specifications
| Brand | WESTWARD |
|---|---|
| Type | socket |
Questions about this item
How do I choose between the listed versions of this crowfoot wrench?
The supplier lists only one version, model 54PR40, with a 3/4 inch head and 3/8 inch drive. No alternative sizes or capacities are offered.
What does the 3/4 inch head size mean when I use this wrench on a fastener?
The 3/4 inch head fits fasteners of that exact size. The alloy steel construction and chrome finish provide durability for hand-tightening or loosening those bolts or nuts.
What does the 3/8 inch drive size cap in practice?
The 3/8 inch square drive limits use to ratchets, extensions or torque wrenches with a matching 3/8 inch drive. It will not fit 1/4 inch or 1/2 inch drive tools.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
