Westward
Westward 53YV17 1/2" Drive Deep Metric Socket 26mm 6 Pt
A 1/2" drive deep metric socket sized 26mm with six points and full polished alloy steel construction
- Typesocket
- Deep 26 mm hex reaches recessed fasteners
- Six-point grip reduces rounding on metric bolts
- Alloy steel construction withstands high torque loads
- Full polish finish resists corrosion and cleans easily
- Meets ASME B107.110-2012 dimensional standard
Socket Purpose
The Westward 53YV17 is a 1/2 inch drive deep metric socket sized at 26 mm with a six point hex output. It is intended for mechanics and technicians who need to reach recessed fasteners on heavy equipment or automotive assemblies.
Alloy Steel Durability
Forged from alloy steel and finished with a full polish, the socket resists rounding under sustained torque loads. The deep well and ASME B107.110-2012 compliance help maintain grip on stubborn bolts without deforming the tool.
Fitment Check
Verify that your 1/2 inch drive ratchet or breaker bar accepts a female square drive and that the 26 mm hex matches the fastener you are turning. The overall length is three inches, so confirm there is enough swing clearance in the work area.
Highlights
- Deep 26 mm hex reaches recessed fasteners
- Six-point grip reduces rounding on metric bolts
- Alloy steel construction withstands high torque loads
- Full polish finish resists corrosion and cleans easily
- Meets ASME B107.110-2012 dimensional standard
Specifications
| Brand | WESTWARD |
|---|---|
| Type | socket |
Questions about this item
Does the 1/2" drive deep socket generate noticeable noise or heat during all-day use?
As a hand-operated alloy-steel socket it produces no noise or heat of its own; any sound or warmth comes from the ratchet or impact tool driving it.
What drive tool must I already own to use this 26 mm, 6-point socket?
A 1/2-inch square-drive ratchet, breaker bar or impact wrench with a female square drive is required to turn the socket.
Will this deep 26 mm socket fit onto the same 1/2" drive ratchet I have used for years?
Yes — the female square drive follows ASME B107.110-2012, so it mates with any standard 1/2-inch drive tool you already keep.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
