Westward
Westward 53YU67 1/2" Drive Metric Socket 16mm 12 Point
A 1/2" drive metric socket with 12 points for 16mm fasteners, made from alloy steel to ASME B107.110-2012
- Typesocket
- 12-point design grips fastener flats securely
- 16 mm metric size fits common automotive bolts
- 1/2 inch square drive works with standard ratchets
- Alloy steel construction resists wear and deformation
- Meets ASME B107.110-2012 dimensional standard
Socket Specification
The Westward 53YU67 is a 1/2" drive metric socket sized at 16mm with a 12-point configuration. It is intended for mechanics and technicians who need a standard-depth socket for general fastening tasks on compatible hardware.
Drive And Size Compatibility
The single specification that decides fitment is the 1/2" female square drive combined with the 16mm socket size. Only fasteners and drive tools matching both dimensions will work correctly with this accessory.
Durability And Finish
The socket is manufactured from alloy steel with a full polished finish for corrosion resistance and clean handling. It meets the ASME B107.110-2012 standard and is a standard tool requiring an accessory for tethering if needed.
Highlights
- 12-point design grips fastener flats securely
- 16 mm metric size fits common automotive bolts
- 1/2 inch square drive works with standard ratchets
- Alloy steel construction resists wear and deformation
- Meets ASME B107.110-2012 dimensional standard
Specifications
| Brand | WESTWARD |
|---|---|
| Type | socket |
Questions about this item
What does the 12-point profile do when I put this socket on a 16 mm fastener?
The twelve points give more engagement angles than a six-point design, letting you seat the socket on a 16 mm bolt or nut in tighter swing arcs.
How does the 1/2 inch square drive limit the torque I can apply?
A 1/2 inch drive is the standard for mid-range torque work; it fits common ratchets and breaker bars but will not accept 3/8 or 3/4 inch tools without an adapter.
Will the 1-1/2 inch overall length clear a deep recess around a 16 mm bolt?
At 1-1/2 inches long this is a standard-depth socket, so it reaches typical bolt heads but may not reach a nut recessed farther than that depth.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
