Westward
Westward 53PN67 1/2" drive metric deep socket set 10-21mm 12pcs
A 12-piece 1/2-inch drive metric deep socket set covering 10mm to 21mm with a chrome finish
- Typesocket
- Reach deep fasteners with 12 metric sizes from 10mm to 21mm
- 1/2-inch drive fits standard ratchets and breaker bars
- Six-point deep sockets grip flats to reduce rounding
- Chrome finish resists corrosion and wipes clean easily
- Meets ANSI standards for professional workshop use
1/2" Drive Metric Deep Socket Set
This 12-piece set covers metric sizes from 10mm to 21mm in a 1/2" drive format. It is intended for mechanics and technicians who need deep reach on common fastener sizes. The chrome finish resists corrosion during regular shop use. No ratchet or extensions are included in the package.
Capacity and Headroom: 10mm to 21mm Range
The twelve sockets span every millimetre between 10mm and 21mm, covering the most frequent metric bolts on passenger vehicles and light equipment. Six-point deep profiles grip flats securely and reduce rounding on stubborn hardware. The set runs out at 21mm, so larger suspension or commercial fasteners will need separate sockets.
Practical Limits of Hand Tool Use
These sockets are not impact rated and must be used with hand ratchets or breaker bars only. The ANSI-standard chrome finish can crack under hammer or power-tool loads. California Proposition 65 warnings apply because the product contains listed chemicals. Buyers needing impact-rated or tether-ready tools should select a different range.
Highlights
- Reach deep fasteners with 12 metric sizes from 10mm to 21mm
- 1/2-inch drive fits standard ratchets and breaker bars
- Six-point deep sockets grip flats to reduce rounding
- Chrome finish resists corrosion and wipes clean easily
- Meets ANSI standards for professional workshop use
Specifications
| Brand | WESTWARD |
|---|---|
| Type | socket |
Questions about this item
Will the 1/2" drive 10–21mm deep sockets fit the ratchets and extensions I already own?
Yes — every socket in the set uses a standard 1/2" square drive, so it works with any 1/2" ratchet, breaker bar or extension you currently have.
How can I verify the 6-point deep sockets are engaging correctly after I put the set to work?
The 6-point profile grips the flats of metric fasteners from 10mm to 21mm; you will feel positive engagement without rounding corners when torque is applied.
Does the 12-piece set include a ratchet or case, or do I need to buy them separately?
The box contains only the twelve 1/2" drive 6-point deep sockets (10mm through 21mm); a ratchet, extensions and storage case are not included and must be purchased separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
