Westward
Westward 3CYT7 Flaring and Cutting Set Double 8 Pc .125-1.125 in 45°
Flaring and tubing cutter kit for aluminum, brass and copper, double 45° flare, .125 to 1.125 in capacity, includes fold-away reamer and spare cutter in case
- TypeAngle, Pitch & Slope Locators
- Double 45° flares create leak-free joints on six tube sizes
- Cuts tubing from .125 to 1.125 in with included spare cutter
- Fold-away reamer removes burrs without a separate tool
- Works on aluminum, brass and copper for HVAC and plumbing
- Eight-piece set stores in a protective case
Westward 3CYT7 Flaring and Cutting Set
The Westward 3CYT7 is an eight-piece flaring and tubing cutter kit designed for shaping aluminum, brass and copper tubing. It handles outside diameters from .125 in to 1.125 in and produces a double 45-degree flare on seven standard sizes ranging from 3/16 in to 5/8 in. A fold-away reamer and a spare cutter are included inside the supplied case.
Who this suits and who should look elsewhere
Plumbers, HVAC technicians and automotive specialists who need reliable double flares on soft-metal tubing will find the capacity range and included sizes practical. Buyers who work exclusively with stainless steel, hardened alloys or tubing larger than 1.125 in should look at heavy-duty hydraulic alternatives instead.
Installation ease and common pitfalls
The set requires only a wrench to secure the die blocks and the yoke, so assembly is straightforward on a bench or in the field. The most frequent issue is splitting the tube when the flare is forced too quickly; using the reamer to deburr the cut end and advancing the cone in small increments prevents that problem.
Highlights
- Double 45° flares create leak-free joints on six tube sizes
- Cuts tubing from .125 to 1.125 in with included spare cutter
- Fold-away reamer removes burrs without a separate tool
- Works on aluminum, brass and copper for HVAC and plumbing
- Eight-piece set stores in a protective case
Specifications
| Brand | Westward |
|---|---|
| Type | Angle, Pitch & Slope Locators |
Questions about this item
What tubing sizes can I flare with the 45° double-flare adapters included in this Westward 3CYT7 set?
The kit provides double 45° flare adapters for 3/16 in, 1/4 in, 5/16 in, 3/8 in, 7/16 in, 1/2 in and 5/8 in tubing.
Will the cutter handle the 1.125 in copper line I already have in the shop?
Yes, the cutter’s maximum capacity is 1.125 in, so it will cut copper, aluminium and brass up to that diameter.
How do I verify the flares are seating correctly after I assemble a joint?
Check that each flare forms an even 45° double flare without cracks, then pressure-test the completed joint for leaks.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
