We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
An 18 inch hose extension with swivel connectors on each end

Westward

Westward 3APF8 18 In Hose Extension with Swivel End

SKU CH-9KP6-6ZN50

An 18 in hose extension with swivel connectors rated to 3,500 psi working pressure and 10,000 psi minimum burst pressure for hand-operated grease guns

  • Swivel end prevents hose kinking during use
  • 18 inch length extends reach to tight fittings
  • 3,500 psi working pressure handles heavy-duty grease guns
  • 10,000 psi minimum burst pressure adds safety margin
  • 1/8 MNPT connections fit standard hand-operated grease guns

18 Inch Grease Gun Hose Extension

This eighteen inch hose extension connects directly to hand operated grease guns. It uses a 1/8 MNPT by 1/8 MNPT connection and adds a swivel end to the fitting. The swivel allows the hose to move freely without twisting or kinking during use. It is built for lubrication tasks where the gun outlet needs extra reach.

Replaces Short Or Fixed Hoses

The extension replaces shorter or rigid hoses that limit access to tight fittings. The swivel end is the key upgrade because it stops the hose from binding when the gun is angled. The jump is worth it when fittings are recessed or positioned at awkward angles. It keeps the hose straight and the grease flowing without a fight.

3500 PSI Working Pressure Limit

The hose is rated for a working pressure of three thousand five hundred psi. Its minimum burst pressure is ten thousand psi. Do not use it on systems that exceed the working pressure rating. The 1/8 MNPT threads limit compatibility to matching gun outlets and fittings. It is not suited for higher pressure hydraulic lines.

Highlights

  • Swivel end prevents hose kinking during use
  • 18 inch length extends reach to tight fittings
  • 3,500 psi working pressure handles heavy-duty grease guns
  • 10,000 psi minimum burst pressure adds safety margin
  • 1/8 MNPT connections fit standard hand-operated grease guns

Specifications

BrandWESTWARD

Questions about this item

What thread size does the 18 in hose extension use for the grease gun outlet?

The hose extension connects with 1/8 MNPT threads on both ends, so it threads directly onto the grease gun outlet and the coupler.

How do you install the swivel end without damaging the fitting?

Thread the swivel end onto the grease gun outlet by hand until snug, then tighten lightly with a wrench; over-tightening can strip the 1/8 MNPT threads.

When should the hose extension be replaced based on its pressure rating?

Replace the hose if it shows cracks, leaks, or permanent deformation, because its working pressure is 3,500 psi and minimum burst pressure is 10,000 psi.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.