Westward
Westward 36A290 Combination Wrench 9mm
A 9 mm combination wrench with open and box ends, 15-degree offset heads and alloy-steel construction
- TypeCombination, Open & Box End Wrenches
- Alloy steel construction resists wear during heavy use
- 15-degree offset head clears obstructions in tight spaces
- Open and box ends cover two fastener styles
- 9 mm metric size fits standard automotive hardware
- California Proposition 65 warning discloses chemical content
Westward 36A290 9mm Combination Wrench
This Westward 36A290 combination wrench fits 9mm metric fasteners with an open end and a box end. The alloy steel construction and chrome finish resist corrosion in automotive and general maintenance tasks. A 15 degree head offset and 15 degree opening angle improve access in confined spaces. The overall length is 5 7/8 inches with a 3/16 inch head thickness.
Thermal Noise and Power Draw
As a manual hand tool the wrench produces no heat, noise or electrical draw during use. Force is applied directly by the operator so there are no thermal or acoustic characteristics to consider. The alloy steel body absorbs impact without deforming under normal loads. California Proposition 65 notices indicate the presence of listed chemicals in the material.
Included Accessories and Software
The product ships as a single wrench with no additional accessories, storage pouch or software. No calibration data or digital resources are bundled with the tool. Buyers who need a full metric set or a ratcheting mechanism must source those items separately. The wrench is ready for immediate use on 9mm fasteners.
Highlights
- Alloy steel construction resists wear during heavy use
- 15-degree offset head clears obstructions in tight spaces
- Open and box ends cover two fastener styles
- 9 mm metric size fits standard automotive hardware
- California Proposition 65 warning discloses chemical content
Specifications
| Brand | WESTWARD |
|---|---|
| Type | Combination, Open & Box End Wrenches |
Questions about this item
How do I use the 15-degree offset on the box end of this Westward 36A290 wrench, and what mistake should I avoid?
Flip the wrench so the 15-degree offset clears nearby obstructions; the common error is keeping the box end flat, which prevents full engagement on recessed fasteners.
What maintenance will this alloy-steel combination wrench need over time?
Wipe the chrome finish clean after each use and apply a light oil film to prevent corrosion; no scheduled replacement parts are required.
At what point does the 3/16-inch head thickness limit torque on stubborn 9 mm fasteners?
The slim 3/16-inch head can round off or slip before the alloy-steel body yields, so stop and use a longer lever if the fastener does not break free.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
