Westward
Westward 36A198 Combination Wrench 16mm
A 16 mm combination wrench with open and box ends made from alloy steel
- TypeCombination, Open & Box End Wrenches
- Alloy steel construction resists wear
- 16 mm metric size fits standard fasteners
- Combination open and box ends handle two tasks
- 15 degree head offset clears obstacles
- Satin finish reduces glare during use
16 mm combination wrench for metric fasteners
The Westward 36A198 is a combination wrench with an open end and a 15-degree offset box end. Its 16 mm head size suits metric bolts and nuts in automotive, mechanical and general maintenance tasks. Alloy steel construction and a satin finish provide corrosion resistance and a secure grip. The tool is supplied new and carries California Proposition 65 warnings for chemicals known to cause cancer and reproductive harm.
Hand tool with no thermals noise or power draw
As a manual hand tool the wrench generates no heat, noise or electrical consumption during use. There are no moving parts, fans or power circuits to consider. Performance depends entirely on the operator's applied force and the fastener condition. The 3/8-inch head thickness and 15-degree opening angle allow access in confined spaces without thermal or acoustic constraints.
Sustained load limited by operator strength
Under continuous high-torque applications the wrench behaves as a solid alloy steel lever with no internal wear mechanisms. The 15-degree offset box end maintains engagement on damaged or rounded fasteners better than a straight profile. Durability is governed by the material yield strength and the user's technique rather than duty-cycle limits. No thermal throttling or performance degradation occurs over extended use.
Highlights
- Alloy steel construction resists wear
- 16 mm metric size fits standard fasteners
- Combination open and box ends handle two tasks
- 15 degree head offset clears obstacles
- Satin finish reduces glare during use
Specifications
| Brand | WESTWARD |
|---|---|
| Type | Combination, Open & Box End Wrenches |
Questions about this item
How do I use the 15-degree offset on the box end of this 16 mm wrench?
Place the box end on the fastener with the offset angled away from obstructions; the 15-degree angle lets you turn the nut in tight spaces without knuckle clearance issues.
Will the alloy steel finish on this 16 mm combination wrench wear off with heavy use?
The satin finish on the alloy steel resists corrosion; under normal use it lasts for years, but repeated high-torque work can eventually polish the surfaces.
At what point does the 3/8 in head thickness limit access on this 16 mm wrench?
The 3/8 in head thickness prevents the box end from fitting into recesses shallower than that depth, so very low-profile fasteners may require a thinner wrench.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
