Westward
Westward 2RUR7 Screw Extractor Set 5 pcs 1/8 to 3/8
Five-piece straight-flute screw extractor set in carbon steel with square drives from 0.189 to 0.375 in for bolts 1/4 to 5/8 in, supplied in a pouch
- TypeAngle, Pitch & Slope Locators
- Removes broken screws with straight-flute carbon-steel extractors
- Five-piece set covers 1/4 in to 5/8 in bolt sizes
- Square-drive shanks in .189, .250, .315, .375 in fit standard tools
- Machined carbon steel withstands high torque without stripping
- Compact pouch keeps all extractors organised and ready
Five-piece extractor set
The Westward 2RUR7 set contains five straight-flute screw extractors made from machining carbon steel. They cover bolt sizes from 1/4 in to 5/8 in and use square drives measuring .189 in, .250 in, .315 in and .375 in. Overall lengths range from 2 11/32 in to 3 3/8 in and the pieces store in a pouch. The set is new and intended for removing broken or seized fasteners.
Suited for occasional removal jobs
Mechanics and maintenance technicians who need a compact kit for stripped or broken bolts will find the range useful. The straight-flute design works with standard drill sizes and square-drive tools. Users who require spiral-flute extractors, larger bolt coverage or a wider variety of drive types should look at other configurations.
Behaviour under sustained use
Carbon steel construction resists deformation when steady torque is applied to a stubborn fastener. The square-drive engagement distributes force evenly across the flats, reducing cam-out during prolonged turning. Heat build-up during continuous extraction is dissipated through the tool body, maintaining hardness across repeated operations. The pouch keeps the pieces organised between jobs.
Highlights
- Removes broken screws with straight-flute carbon-steel extractors
- Five-piece set covers 1/4 in to 5/8 in bolt sizes
- Square-drive shanks in .189, .250, .315, .375 in fit standard tools
- Machined carbon steel withstands high torque without stripping
- Compact pouch keeps all extractors organised and ready
Specifications
| Brand | Westward |
|---|---|
| Type | Angle, Pitch & Slope Locators |
Questions about this item
What drive tool fits the .375 in square drive on the largest extractor?
A 3/8 in square-drive ratchet, T-handle or impact driver engages the .375 in square drive on the largest extractor.
Will the .189 in drive extractor grip a bolt smaller than 1/4 in?
The set covers bolt sizes from 1/4 in to 5/8 in; the .189 in drive extractor is sized for the 1/4 in bolt in that range.
How do I confirm the extractor has bitten before applying full torque?
Turn the extractor counter-clockwise with light pressure; visible bite marks on the bolt and resistance to further turning show it has engaged.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
