Westward
Westward 2RUP8 Screw Extractor Set 5 pcs Carbon Steel
A five-piece spiral-flute screw extractor set in carbon steel removes broken bolts from #8 up to 3/4 in and stores in a pouch
- TypeAngle, Pitch & Slope Locators
- Removes broken fasteners with spiral flute design
- Five extractors cover bolt sizes from #8 to 3/4 in
- Carbon steel construction resists wear during extraction
- Square drive sizes from .118 in to .335 in fit common tools
- Includes pouch for organised storage and portability
Screw extractor set for damaged fasteners
This Westward set contains five spiral-flute extractors made from carbon steel. They are designed to remove broken screws and bolts ranging from #8 up to 3/4 inch. Each piece has a square drive for use with a tap wrench or similar tool. The extractors come stored in a pouch.
For maintenance technicians and DIY repair
Mechanics and technicians who regularly encounter seized or sheared fasteners will find the range useful. The spiral-flute design bites into the drilled-out remnant to back it out. Users who need straight-flute extractors or a larger assortment for heavier industrial bolts should look at alternative kits.
Spiral-flute type with five square-drive sizes
The set covers five drive sizes: 0.118 in, 0.157 in, 0.197 in, 0.264 in and 0.335 in. These dimensions determine which extractor matches the pilot hole you have drilled. Selecting the correct drive size is the single factor that decides whether the tool will engage the damaged fastener successfully.
Highlights
- Removes broken fasteners with spiral flute design
- Five extractors cover bolt sizes from #8 to 3/4 in
- Carbon steel construction resists wear during extraction
- Square drive sizes from .118 in to .335 in fit common tools
- Includes pouch for organised storage and portability
Specifications
| Brand | Westward |
|---|---|
| Type | Angle, Pitch & Slope Locators |
Questions about this item
How can I confirm the spiral flute extractors are gripping properly after drilling the pilot hole?
When the square drive engages the extractor and turning counter-clockwise produces steady resistance without the tool slipping, the spiral flutes are biting into the broken fastener.
What comes in the pouch and do I need separate drill bits?
The pouch holds five spiral flute extractors with square drives of .118, .157, .197, .264 and .335 in; drill bits for the pilot holes are not included and must be purchased separately.
Which extractor from the five should I use for a 1/2 inch bolt?
Match the bolt diameter to the extractor whose square drive is closest to the recommended drill size for that bolt — the set covers #8 through 3/4 in bolts across the five drive sizes.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
