Westward
Westward 2RUP7 screw extractor spiral flute size 9 hand tool
Spiral-flute extractor removes right-hand bolts from 1-3/4 to 2-1/8 inches using a 1-1/16 inch drill and square drive
- TypeAngle, Pitch & Slope Locators
- Spiral-flute design grips broken bolts securely
- High-speed steel construction resists wear during extraction
- Square drive accepts standard wrenches for leverage
- Drill guide 1-1/16 in matches bolt preparation
- Right-hand thread compatibility covers common fasteners
Westward Size 9 Spiral Flute Extractor
The Westward 2RUP7 is a spiral flute screw extractor designed to remove damaged or seized right-hand threaded fasteners. It is made from high-speed steel for durability in machining applications. The tool features a square drive measuring 0.984 in and an overall length of 4 5/8 in. It targets bolt sizes ranging from 1-3/4 to 2-1/8 in.
For maintenance crews removing large bolts
This extractor suits technicians working on heavy equipment where large fasteners have rounded off or broken. The high-speed steel construction withstands the torque required for bolts up to 2-1/8 in. It is not for left-hand thread removal or for fasteners smaller than 1-3/4 in. Buyers needing a range of sizes should look at a multi-piece set.
Drill size 1-1/16 in for bolt preparation
The tool requires a 1-1/16 in drill bit to prepare the damaged bolt before extraction. It comfortably handles the specified bolt range of 1-3/4 to 2-1/8 in using the spiral flute design to grip the drilled hole. Capacity runs out beyond the 2-1/8 in maximum bolt size or on left-hand threads. The square drive accepts standard drive tools for applied torque.
Highlights
- Spiral-flute design grips broken bolts securely
- High-speed steel construction resists wear during extraction
- Square drive accepts standard wrenches for leverage
- Drill guide 1-1/16 in matches bolt preparation
- Right-hand thread compatibility covers common fasteners
Specifications
| Brand | Westward |
|---|---|
| Type | Angle, Pitch & Slope Locators |
Questions about this item
What drill bit size must I have on hand to use the 1-1/16 in drill size spec?
You need a 1-1/16 in drill bit to prepare the hole before inserting the extractor.
Will the 0.984 in square drive fit the 1/2 in drive tools I already own?
The 0.984 in square drive is slightly larger than a standard 1/2 in drive, so an adapter or matching wrench is required.
How do I confirm the spiral flutes are gripping the bolt correctly during removal?
Apply steady counter-clockwise pressure; the flutes should bite and turn the bolt without slipping.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
