Westward
Westward 2LXN5 Straight Flute Hand Tap M8-1.25 Taper 4 Flutes Metric
Cuts M8 × 1.25 metric coarse threads with a straight-flute taper design and four flutes in uncoated carbon steel
- TypeHole, Drill, Bore & Wire Gauges
- Metric M8 x 1.25 thread cuts standard coarse holes
- Taper chamfer starts threads easily in through-holes
- Four straight flutes clear chips efficiently in blind holes
- Carbon steel construction resists wear during hand tapping
- Bright uncoated finish suits general-purpose threading tasks
M8-1.25 Metric Straight Flute Hand Tap
The Westward 2LXN5 is a straight flute hand tap designed for cutting M8 x 1.25 metric coarse threads. It suits maintenance technicians and machinists who need to create new internal threads or repair damaged ones in a workshop or field setting.
Taper Lead with Four Flutes
The taper chamfer provides a gradual start that eases alignment when beginning a thread by hand. Four flutes distribute cutting forces evenly and improve chip evacuation, reducing the chance of tap breakage during manual operation.
Carbon Steel Construction and Right-Hand Threading
Bright, uncoated carbon steel offers reliable wear resistance for general-purpose tapping in steel and non-ferrous metals. The right-hand thread direction matches standard fastener conventions, and the 1 1/8 inch thread length accommodates typical through-hole depths.
Highlights
- Metric M8 x 1.25 thread cuts standard coarse holes
- Taper chamfer starts threads easily in through-holes
- Four straight flutes clear chips efficiently in blind holes
- Carbon steel construction resists wear during hand tapping
- Bright uncoated finish suits general-purpose threading tasks
Specifications
| Brand | Westward |
|---|---|
| Type | Hole, Drill, Bore & Wire Gauges |
Questions about this item
Will the carbon-steel tap need replacement once the cutting edges wear?
The tap is made of uncoated carbon steel; cutting edges will dull with use and the tool will need replacing when threads no longer cut cleanly.
What limits thread depth when using the 1 1/8 in thread length?
The 1 1/8 in thread length sets the maximum depth you can cut in a single pass; deeper holes require multiple passes or a longer tap.
Does the bright finish affect heat buildup during all-day tapping?
The bright uncoated finish offers no heat-barrier coating, so the tap will warm with continuous cutting; use cutting fluid to manage temperature.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
