Westward
Westward 2LWG2 Straight Flute Hand Tap 1/2"-13 Taper 4 Flutes UNC
A straight-flute hand tap cuts UNC 1/2"-13 threads in a taper style using four flutes and high-speed steel
- TypeHole, Drill, Bore & Wire Gauges
- Cuts 1/2"-13 UNC threads with H5 limit precision
- Taper lead starts threads smoothly in through holes
- Four straight flutes clear chips efficiently while tapping
- High-speed steel construction resists wear during repeated use
- Bright uncoated finish suits general-purpose threading tasks
Westward 1/2"-13 UNC Straight Flute Tap
This Westward straight flute hand tap cuts 1/2"-13 UNC threads with a taper lead. It is made from high-speed steel with a bright, uncoated finish and features four flutes. The tool is designed for right-hand threading in general-purpose applications. Machinists and maintenance technicians use it for through-hole or blind-hole work.
Check thread specifications
Verify that the workpiece requires a 1/2"-13 UNC thread form before ordering. Confirm the material is suitable for high-speed steel cutting tools. Ensure the drilled hole matches the correct tap drill size for this thread limit. The taper chamfer helps start threads straight in the hole.
Consistent cutting in extended operations
The high-speed steel body maintains hardness during prolonged use in steel or iron. Four flutes distribute chip load evenly across the cutting edges. The bright finish allows visual inspection of wear without coating masking. Taper lead reduces torque spikes when deepening threads in long production runs.
Highlights
- Cuts 1/2"-13 UNC threads with H5 limit precision
- Taper lead starts threads smoothly in through holes
- Four straight flutes clear chips efficiently while tapping
- High-speed steel construction resists wear during repeated use
- Bright uncoated finish suits general-purpose threading tasks
Specifications
| Brand | Westward |
|---|---|
| Type | Hole, Drill, Bore & Wire Gauges |
Questions about this item
What comes in the box with the Westward 2LWG2 tap?
The box contains the Westward 2LWG2 straight flute hand tap only. A tap wrench or handle must be purchased separately to turn the tool.
How do I choose the right tap for my threading job?
Choose this tap when you need to cut a 1/2"-13 UNC thread with a taper lead and H5 limit in a through-hole or to start a blind hole.
What does the 1/2"-13 UNC size mean when I use the tap?
It cuts a standard coarse thread with a half-inch major diameter and 13 threads per inch, matching common UNC fasteners.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
