Westward
Westward 2HUN2 C-Clamp 3 in 1 7/8 in throat 800 lb hand tool
A 3-inch capacity C-clamp with 1 7/8-inch throat depth and 800 lb clamping force
- TypeClamps
- FinishPowder Coat
- Strong 800 lb clamping force for heavy-duty work
- 3 in jaw opening fits large workpieces
- 1 7/8 in throat depth reaches past edges
- Powder-coated cast iron body resists corrosion
- Nickel-plated steel spindle with sliding T-handle
3 in C-Clamp with 800 lb force
This Westward C-clamp opens to a maximum jaw width of 3 in and delivers a clamping force of 800 lb. The cast iron body has a powder coat finish for corrosion resistance, while the nickel-plated steel spindle resists wear. A sliding T-handle provides the leverage needed to apply full pressure quickly. The flat jaw pads include a swivel pad that adjusts to uneven workpiece surfaces.
Users needing 1 7/8 in throat depth
Woodworkers and metalworkers who require a standard throat depth of 1 7/8 in for reaching past the edge of a workpiece will find this clamp suitable. The 3 in maximum opening handles thick stock and wide glue-ups. Buyers who need a deeper throat to reach further into a workpiece or a wider maximum opening for larger assemblies should look at other models. The fixed 800 lb force rating also means this tool cannot be adjusted for lighter clamping pressure on delicate materials.
800 lb clamping force capacity
The single specification that determines if this is the right part is the 800 lb clamping force. This rating defines the maximum pressure the clamp can exert when the sliding T-handle is fully tightened. Verify that your application requires this level of force and that the workpiece can withstand it without damage. The clamp also carries a California Proposition 65 warning for chemicals known to cause cancer and reproductive harm.
Highlights
- Strong 800 lb clamping force for heavy-duty work
- 3 in jaw opening fits large workpieces
- 1 7/8 in throat depth reaches past edges
- Powder-coated cast iron body resists corrosion
- Nickel-plated steel spindle with sliding T-handle
Specifications
| Brand | Westward |
|---|---|
| Model | 2HUN2 |
| Type | Clamps |
| Finish | Powder Coat |
Questions about this item
Does the sliding T-handle on the Westward 2HUN2 generate heat or noise during continuous clamping?
No, the clamp is a manual hand tool with a steel spindle and sliding T-handle; it produces no heat or noise during use.
What additional items are required to operate the Westward 2HUN2 C-Clamp?
The clamp works on its own; no extra tools, power sources or accessories are needed to achieve its 800 lb clamping force.
Can the Westward 2HUN2 be used with older cast-iron C-clamps in a mixed setup?
Yes, its 3 in jaw opening, 1 7/8 in throat depth and flat jaw pad with swivel pad let it work alongside any standard C-clamp.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
