Westward
Westward 23X826 2 in stiff blade scraper beryllium copper
Non-sparking beryllium copper scraper with a 2 in stiff blade and 10 in straight handle for 12 in overall length
- TypeDrywall & Plastering Tools
- Non-sparking safety for hazardous environments
- Beryllium copper blade resists corrosion and wear
- Stiff 2 in blade removes tough coatings
- 10 in handle gives comfortable reach
- 12 in overall length for controlled leverage
Westward 23X826 Beryllium Copper Scraper
The Westward 23X826 is a non-sparking hand scraper built for environments where ignition risk must be avoided. Its beryllium copper blade and handle suit maintenance crews working near flammable vapours or sensitive equipment. The stiff 2 in blade with bevel edge handles adhesive, scale and coating removal on flat surfaces.
Stiff blade installs by hand with no tools
The scraper arrives fully assembled with a straight 10 in handle bonded to the blade. No adjustment or fasteners are required before use. The stiff blade resists flex under pressure, but the bevel edge can dig into soft substrates if the angle is too aggressive. Users should apply even forward strokes to avoid gouging the workpiece.
Check non-sparking needs and blade width first
Verify that your site safety plan requires non-sparking tools before selecting this beryllium copper model. Confirm the 2 in blade width matches the joint or surface you intend to clean. The overall 12 in length keeps hands clear of hot or hazardous zones, but tight recesses may limit access. California Proposition 65 applies to this product.
Highlights
- Non-sparking safety for hazardous environments
- Beryllium copper blade resists corrosion and wear
- Stiff 2 in blade removes tough coatings
- 10 in handle gives comfortable reach
- 12 in overall length for controlled leverage
Specifications
| Brand | Westward |
|---|---|
| Type | Drywall & Plastering Tools |
Questions about this item
How can I confirm the scraper is non-sparking and safe for hazardous areas after first use?
The tool is made entirely of beryllium copper and carries a non-sparking designation, so it will not generate sparks during normal scraping tasks.
What components are included with the scraper and what must be purchased separately?
The scraper arrives as a single assembled unit with a 2-inch stiff bevel blade and 10-inch straight handle; no extra blades or accessories are included.
Which version should I choose for a 2-inch wide stiff blade in beryllium copper?
The 23X826 model provides exactly a 2-inch wide stiff bevel blade of beryllium copper on a 12-inch overall length.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
