Westward
Westward 23X758 Hot Melt Adhesive Stick 7/16 in 10 in
Hot melt adhesive stick, 10 in long with 7/16 in diameter, bonds wood, metal, plastic and fabric in 30 to 60 seconds
- TypeSealing Compound
- Fast bonding in 30 seconds working time
- Full cure reached in 65 seconds for quick handling
- Bonds ceramic, fabric, foam, leather, metal, paper, plastic, rubber, wood
- Electrically insulating with 400 psi shear strength
- Low odour, non-toxic formula suitable for outdoor use
General-Purpose Hot Melt Adhesive Stick
The Westward 23X758 is a smooth white hot melt adhesive stick measuring 10 inches long with a 7/16 inch diameter. It is designed for general-purpose bonding across a wide range of materials including wood, metal, plastic, fabric, foam, leather, ceramic, paper, paperboard and rubber. The formulation is non-toxic, low odour and electrically insulating, making it suitable for both indoor and outdoor applications where heat resistance and high tack are required.
Working Time and Cure Constraints
This adhesive offers a working time of 30 seconds before it begins to set, reaching full cure in 65 seconds. The melting temperature is 176 degrees Fahrenheit, which dictates the minimum heat output required from the applicator gun. Users must complete positioning and assembly within the half-minute open window, as the short cure cycle leaves no margin for extended adjustments or complex multi-part alignments.
Shear Strength Determines Suitability
The bond delivers a shear strength of 400 psi, which is the key figure for deciding if this stick meets the structural demands of the job. It is not intended for load-bearing structural joints or high-stress mechanical assemblies that exceed this value. Buyers needing higher shear performance or UV-resistant bonds for prolonged outdoor exposure should select a different formulation.
Highlights
- Fast bonding in 30 seconds working time
- Full cure reached in 65 seconds for quick handling
- Bonds ceramic, fabric, foam, leather, metal, paper, plastic, rubber, wood
- Electrically insulating with 400 psi shear strength
- Low odour, non-toxic formula suitable for outdoor use
Specifications
| Type | Sealing Compound |
|---|---|
| Brand | WESTWARD |
Questions about this item
What diameter stick should I pick for a 7/16 in glue gun?
The stick is 7/16 in diameter, which matches standard 7/16 in hot-melt guns.
How long does the 30 sec working time give me to position parts?
You have about 30 seconds after applying the adhesive before it starts to set, then full cure in 65 seconds.
What does the 176 °F melting temperature mean for my glue gun?
The adhesive melts at 176 °F, so it works with any standard low-temperature hot-melt gun rated for that range.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
