Westward
Westward 22UW13 4-Cutter Hammer Drill Bit 1/2 in x 18 in SDS Plus
1/2-inch carbide-tipped SDS Plus bit drills 16 inches deep in masonry with a four-cutter head
- Drills deeper holes with 16 in maximum drilling depth
- Four-cutter carbide tip cuts masonry faster and cleaner
- 18 in overall length reaches through thick walls
- SDS Plus shank locks securely in rotary hammers
- Bright uncoated finish resists corrosion in damp conditions
Westward 4-Cutter SDS Plus Bit
The Westward 22UW13 hammer drill bit uses a four-cutter carbide tip to break through concrete, brick and stone. Its SDS Plus shank locks into compatible rotary hammers for positive power transfer. The bright uncoated finish keeps the cutting edges exposed for fast material removal on site.
Suited for deep-hole anchoring work
This bit reaches a maximum drilling depth of 16 in, so it suits installers setting long anchors or rebar dowels. The 18 in overall length also clears thick base plates. Builders who only drill shallow holes or need a hex shank for a standard drill driver should choose a different accessory.
1/2 in cutting diameter decides fit
The 1/2 in diameter matches common anchor and fastener sizes used in structural connections. Verify that the rotary hammer accepts SDS Plus shanks and that the hole diameter matches the specified anchor before purchasing.
Highlights
- Drills deeper holes with 16 in maximum drilling depth
- Four-cutter carbide tip cuts masonry faster and cleaner
- 18 in overall length reaches through thick walls
- SDS Plus shank locks securely in rotary hammers
- Bright uncoated finish resists corrosion in damp conditions
Specifications
| Brand | WESTWARD |
|---|
Questions about this item
Does the 1/2 in 18 in SDS Plus bit arrive alone or with a case?
The bit ships as a single 1/2 in diameter, 18 in overall length SDS Plus shank drill bit; no case or additional accessories are included.
Which Westward 4-cutter SDS Plus size should I choose for a 16 in deep hole?
This 1/2 in x 18 in bit provides a 16 in maximum drilling depth; select a shorter bit only if you need less reach.
What does the 16 in maximum drilling depth mean on site?
You can drill up to 16 in into masonry before the flutes fill, so the bit suits through-holes in standard block and concrete walls.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
