Westward
Westward 22UV79 SDS Plus 2-Cutter Hammer Drill Bit 5/8" x 18"L
SDS Plus 2-cutter hammer drill bit with a 5/8 inch carbide tip, 18 inch overall length and 16 inch maximum drilling depth
- SDS Plus shank fits rotary hammers directly
- 2-cutter carbide tip drills masonry efficiently
- 18 in overall length reaches deep holes
- 16 in maximum drilling depth handles thick material
- Bright uncoated finish resists corrosion naturally
Product Identity
This SDS Plus hammer drill bit from Westward is built for masonry work in concrete, brick and stone. The 5/8 inch carbide tip and 18 inch overall length suit deep-hole applications in construction and renovation.
Compatibility Check
Confirm your rotary hammer accepts SDS Plus shanks with a 25/64 inch diameter before ordering. The bit requires a tool capable of delivering hammer action and a chuck that locks the spline profile securely.
Thermals Noise Power
Carbide cutting edges run cooler than standard steel when drilling deep into masonry. The uncoated bright finish reduces friction buildup during extended use, while the two-cutter geometry keeps vibration and noise at manageable levels for the operator.
Highlights
- SDS Plus shank fits rotary hammers directly
- 2-cutter carbide tip drills masonry efficiently
- 18 in overall length reaches deep holes
- 16 in maximum drilling depth handles thick material
- Bright uncoated finish resists corrosion naturally
Specifications
| Brand | WESTWARD |
|---|
Questions about this item
Does the 22UV79 bit come with any accessories or do I need to buy an SDS Plus chuck separately?
The 22UV79 is a single SDS Plus masonry drill bit; no accessories are included. It fits directly into an SDS Plus rotary hammer — no separate chuck or adapter is required.
Should I choose the 5/8 inch diameter with 18 inch overall length or a different size for deeper holes?
This model has an 18 inch overall length and a maximum drilling depth of 16 inches. Select it when you need to drill 5/8 inch diameter holes up to that depth in masonry.
What does the 16 inch maximum drilling depth mean when the bit is 18 inches long overall?
The 16 inch figure is the usable flute length for material removal; the remaining 2 inches accommodate the SDS Plus shank that locks into the rotary hammer.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
