Westward
Westward 22UV78 SDS Plus Hammer Drill Bit 5/8" x 12"L 2-Cutter
Carbide-tipped SDS Plus bit drills 5/8 inch holes to 10 inches deep in masonry
- 5/8 in diameter drills standard masonry anchors
- 12 in overall length reaches deep holes
- 10 in maximum drilling depth handles thick walls
- 2-cutter carbide tip cuts cleanly in concrete
- SDS Plus shank fits rotary hammer drills
Application & User Fit
The Westward 22UV78 is a 2-cutter SDS Plus hammer drill bit built for masonry work. It suits tradespeople and DIY users who need a straight shank bit for drilling into concrete, brick or block with a compatible rotary hammer. Buyers who require a different shank system or a larger diameter than 5/8 in should look elsewhere.
Capacity & Headroom
The bit has an overall length of 12 in and a maximum drilling depth of 10 in, giving usable reach for through-holes and anchor installations in standard wall thicknesses. The carbide tip handles typical masonry materials, while the 2-cutter geometry clears dust during normal use. Depths beyond 10 in exceed the designed capacity.
Thermals, Noise & Power Draw
The bright uncoated finish and carbide tip are designed to dissipate heat during hammer drilling cycles. Friction and vibration levels depend on the rotary hammer used and the hardness of the substrate. No specific thermal, acoustic or power-draw figures are provided for the accessory itself.
Highlights
- 5/8 in diameter drills standard masonry anchors
- 12 in overall length reaches deep holes
- 10 in maximum drilling depth handles thick walls
- 2-cutter carbide tip cuts cleanly in concrete
- SDS Plus shank fits rotary hammer drills
Specifications
| Brand | WESTWARD |
|---|
Questions about this item
Will the SDS Plus shank on this 5/8 inch bit fit the rotary hammer I already own?
Yes, the SDS Plus shank is the standard interface used by most rotary hammers sold today, so it will lock into your existing tool without an adapter.
How can I confirm the 22UV78 is drilling to the full 10 inch depth after I install it?
Mark the flute at 10 inches with tape or a marker; when the dust clears and the mark reaches the surface, you have reached the maximum drilling depth.
Does the 22UV78 come with a dust extraction attachment or do I need to buy one separately?
The box contains only the 12 inch carbide-tipped bit; dust extraction accessories are sold separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
