Westward
Westward 22UV72 SDS Plus 2-Cutter Hammer Drill Bit 1/2" x 18"L
SDS Plus 2-cutter masonry bit drills to 16 in depth with 18 in overall length and bright carbide tip
- 1/2 inch diameter handles large masonry holes
- 18 inch overall length reaches deep into concrete
- 16 inch drilling depth covers thick walls
- SDS Plus shank fits standard rotary hammers
- Carbide tip stays sharp in hard materials
Professional Masonry Drilling
The Westward 22UV72 is a straight-shank SDS Plus hammer drill bit built for masonry work. Its 1/2 in diameter and 18 in overall length suit contractors and serious DIYers drilling deep anchor holes in concrete, brick or block. The 2-cutter carbide tip delivers reliable material removal in standard rotary hammer applications.
Carbide Tip And Bright Finish
A carbide-tipped cutting head resists wear when striking hard aggregate, while the bright uncoated surface reduces binding in dusty holes. The 25/64 in shank diameter fits SDS Plus chucks securely, allowing efficient power transfer from the hammer mechanism to the tip. Users can drill to a maximum depth of 16 in before withdrawing to clear debris.
16 In Maximum Drilling Depth
This single figure decides whether the bit reaches your required embedment. If your anchors, rebar dowels or through-holes need more than 16 in of usable depth, this bit will fall short and a longer variant is necessary. For standard structural anchoring within that range, the length matches the task.
Highlights
- 1/2 inch diameter handles large masonry holes
- 18 inch overall length reaches deep into concrete
- 16 inch drilling depth covers thick walls
- SDS Plus shank fits standard rotary hammers
- Carbide tip stays sharp in hard materials
Specifications
| Brand | WESTWARD |
|---|
Questions about this item
What is the SDS Plus shank diameter of the 22UV72 bit?
The shank diameter is 25/64 in, matching the SDS Plus standard for rotary hammer chucks.
What overall length and maximum drilling depth does the 22UV72 provide?
The bit measures 18 in overall length and offers a maximum drilling depth of 16 in.
How is the 22UV72 installed in an SDS Plus rotary hammer and what step is often missed?
Insert the shank until it clicks into the chuck, then pull back firmly to confirm the bit is locked; many users skip the pull-back check.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
