Westward
Westward 22UV58 2-Cutter SDS Plus Hammer Drill Bit 1/4 in x 12 in
Drills masonry with a 2-cutter carbide tip, 1/4 inch diameter and 12 inch overall length for 10 inch depth via SDS Plus shank
- SDS Plus shank fits rotary hammer drills
- 2-cutter carbide tip drills masonry efficiently
- 12 in overall length reaches deep holes
- 10 in maximum drilling depth handles thick material
- Bright uncoated finish resists corrosion naturally
Westward 22UV58 SDS Plus Hammer Drill Bit
The Westward 22UV58 is a 2-cutter SDS Plus hammer drill bit designed for masonry work. It suits tradespeople and serious DIY users who need to drill anchor holes in concrete, brick or block. The straight carbide-tipped design provides reliable performance for everyday installation tasks. Its 1/4 inch diameter matches common fastener sizes used in construction and renovation.
Sustained drilling in hard masonry
Under continuous load the carbide tip maintains cutting edges longer than standard steel bits. The straight flute geometry clears dust efficiently during deep holes, reducing binding and heat build-up. Bright uncoated surfaces resist corrosion in damp environments. The SDS Plus shank transfers impact energy directly from the rotary hammer without slipping.
10 inch maximum drilling depth
The 12 inch overall length allows a maximum drilling depth of 10 inches, which decides whether this bit reaches your required embedment. Shank diameter is 25/64 inch to fit SDS Plus chucks securely. Buyers needing deeper holes or larger diameters must select a longer or wider bit. Condition is new.
Highlights
- SDS Plus shank fits rotary hammer drills
- 2-cutter carbide tip drills masonry efficiently
- 12 in overall length reaches deep holes
- 10 in maximum drilling depth handles thick material
- Bright uncoated finish resists corrosion naturally
Specifications
| Brand | WESTWARD |
|---|
Questions about this item
How much heat does the 2-cutter carbide tip generate when drilling continuously in masonry?
The 2-cutter carbide tip is designed for efficient material removal, which reduces friction and heat buildup during extended drilling in masonry.
What SDS Plus rotary hammer is required to use this 1/4 inch by 12 inch bit?
Any SDS Plus rotary hammer with a standard SDS Plus chuck accepts the 25/64 inch shank diameter for secure engagement.
Will the 12 inch overall length fit the depth gauge on an older SDS Plus hammer drill?
The 12 inch overall length and 10 inch maximum drilling depth are compatible with standard SDS Plus depth gauges found on older hammer drills.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
