Westward
Westward 20YD77 Flux-Cored Welding Wire .0625 in 33 lb
Flux-cored welding wire for carbon steel, .0625 in diameter on a 33 lb plastic spool, E71T-1 classification with 70 to 95 ksi tensile strength
- TypeWelding Supplies
- Flux-cored wire for gas-shielded FCAW on carbon steel
- 33 lb plastic spool reduces change-over frequency
- .0625 in diameter suits 1/16 in welding applications
- 70–95 ksi tensile strength meets AWS E71T-1C/M
- 58 ksi minimum yield strength ensures reliable joint integrity
Wire Specifications
Westward 20YD77 is a flux-cored welding wire supplied on a plastic spool weighing 33 lb. The wire diameter is .0625 in and it carries AWS classifications E71T-1C and E71T-1M for carbon-steel-to-carbon-steel joining with DCEP current.
Mechanical Properties
As-welded tensile strength ranges from 70 to 95 ksi while yield strength meets a minimum required 58 ksi and achieves 58 ksi as welded. These figures describe the deposited metal under sustained loading rather than short-term peak values.
Setup Checks
Verify your machine supports gas-shielded flux-cored (FCAW) operation with DCEP polarity and can feed .0625 in wire from a 33 lb spool. Confirm the workpiece is carbon steel and that local regulations allow use of a product carrying a Proposition 65 cancer warning.
Highlights
- Flux-cored wire for gas-shielded FCAW on carbon steel
- 33 lb plastic spool reduces change-over frequency
- .0625 in diameter suits 1/16 in welding applications
- 70–95 ksi tensile strength meets AWS E71T-1C/M
- 58 ksi minimum yield strength ensures reliable joint integrity
Specifications
| Brand | WESTWARD |
|---|---|
| Type | Welding Supplies |
Questions about this item
Does the .0625 in diameter wire feed smoothly through standard drive rolls during long welding sessions?
The wire measures .0625 in diameter and weighs 33 lb on a plastic spool, so it feeds consistently through correctly sized drive rolls during extended use.
What welding machine settings and gas supply are needed to run this E71T-1C/M wire?
This flux-cored wire requires a DCEP current setting and a gas-shielded setup compatible with AWS E71T-1C or E71T-1M classifications for carbon steel.
Will the 70 to 95 ksi tensile strength welds match the strength of older carbon steel structures I am repairing?
The as-welded tensile strength of 70 to 95 ksi and minimum 58 ksi yield strength meet typical structural requirements for carbon steel repair work.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
