Westward
Westward 1YMZ9 Cable Slitter 1-1/8 in
Cable slitter strips 8 to 28 mm diameter cable with a rotating blade and adjustable cut depth up to 3/16 in
- TypeKnives, Cutters & Snips
- Strips cables from 16 to 28 mm diameter
- Blade rotates 90 degrees for versatile slitting angles
- Knob adjusts cut depth up to 3/16 in insulation thickness
- Cuts solid and stranded wire up to 1-1/8 in capacity
- Standard cushion grip provides comfortable handling control
Westward Cable Slitter 1-1/8 in
The Westward 1YMZ9 is a hand-operated cable slitter designed for electricians and technicians who need to strip insulation from solid or stranded wire. It handles cable diameters from 8 to 28 mm and cuts up to 1-1/8 in. The tool features a standard cushion grip for comfortable use during repetitive tasks.
Sustained load behaviour
Under continuous use the blade rotates 90 degrees to maintain a clean slitting action without binding on thick insulation. The manual depth knob lets the operator set the cut depth for insulation up to 3/16 in, preventing damage to conductors during long stripping sessions. No insulated handles are fitted, so live-circuit work is not supported.
Installation and common issues
No installation is required; the tool is ready to operate once the depth knob is adjusted for the specific cable size. A frequent issue occurs when the knob is not tightened, allowing the blade depth to shift mid-cut and nick the wire. Users also report that the cushion grip can loosen after heavy daily use.
Highlights
- Strips cables from 16 to 28 mm diameter
- Blade rotates 90 degrees for versatile slitting angles
- Knob adjusts cut depth up to 3/16 in insulation thickness
- Cuts solid and stranded wire up to 1-1/8 in capacity
- Standard cushion grip provides comfortable handling control
Specifications
| Brand | Westward |
|---|---|
| Type | Knives, Cutters & Snips |
Questions about this item
Does the Westward 1YMZ9 cable slitter generate heat or noise when used continuously throughout a shift?
The tool is a manual hand cutter with no motor, so it produces no measurable heat or audible noise during extended use.
What existing tools or accessories are required before the 1YMZ9 can strip cable?
Only the cable itself is needed; the slitter’s rotating blade and depth knob operate without external power, fixtures or supplementary cutters.
Will the 1YMZ9 work on older solid and stranded wire already installed in a panel?
Yes — it strips solid and stranded conductors from 8 mm to 28 mm diameter and handles insulation up to 3/16 in thick, matching legacy wiring sizes.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
