We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 2/0 gauge industrial wire coil 25 ft TPR insulation

Westward

Westward 19YD58 Industrial Wire 2/0 ga 25 ft Black

SKU CH-HCNS-0V12K

Battery jumper cable with 2/0 gauge copper conductors, TPR insulation rated to 150°F, and SAE J1127 compliance

  • Heavy-duty 2/0 gauge copper carries up to 190 amps
  • 25 ft length gives reach for large engine bays
  • TPR insulation withstands 150 °F for engine-heat durability
  • Rated to 60 volts for standard automotive systems
  • Meets SAE J1127 standard for battery cable quality

Battery Cable 2/0 Gauge 25 Feet

This Westward battery cable is a 2/0 gauge conductor with 25 feet of black TPR insulation. It is rated for a maximum of 190 amps, 60 volts and 150 degrees Fahrenheit. The copper conductor meets SAE J1127 standards for industrial and automotive power distribution. It suits installers who need heavy-gauge flexible cable for battery interconnections or high-current jump-start leads.

Replacing Thinner Gauge Jump Leads

The 2/0 gauge cross-section replaces lighter cables that cannot sustain 190 amps without excessive voltage drop or overheating. The upgrade is worth it when the circuit length approaches the full 25 feet or when repeated high-current draws would degrade smaller insulation. It is not for buyers who need a smaller diameter cable that fits tight routing channels or lower amperage accessory wiring.

Build Integration Copper Conductor TPR Jacket

The cable terminates in bare copper ready for crimp lugs or compression terminals matched to 2/0 gauge. The TPR jacket resists oil, abrasion and the stated temperature ceiling so it can run near engine compartments or industrial machinery. It frees up the installer from splicing multiple shorter lengths to reach 25 feet. No connectors or lugs are included in the package.

Highlights

  • Heavy-duty 2/0 gauge copper carries up to 190 amps
  • 25 ft length gives reach for large engine bays
  • TPR insulation withstands 150 °F for engine-heat durability
  • Rated to 60 volts for standard automotive systems
  • Meets SAE J1127 standard for battery cable quality

Specifications

BrandWESTWARD

Questions about this item

What terminal lug size fits the 2/0 ga cable for a secure crimp?

Use lugs rated for 2/0 AWG copper conductor; the cable carries up to 190 amps at 60 volts, so the lug barrel must match that gauge and ampacity.

How do I strip the TPR insulation without nicking the copper strands?

Score the TPR jacket carefully with a sharp knife or cable stripper set for 2/0 gauge, then pull the slug off; nicked strands reduce the 190-amp capacity.

When should I replace the cable if the black TPR jacket shows cracks?

Replace it once cracks expose the copper; the TPR is rated to 150 °F, and UV or heat damage compromises the 60-volt insulation and SAE J1127 compliance.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.