Westward
Westward 10D468 18 in PVC Cutter 2-1/2 in Cap
Cuts PEX, PVC and other plastic tubing up to 2-3/8 in with a ratcheting shear action on an 18 in aluminium frame
- TypeKnives, Cutters & Snips
- Cuts up to 2-3/8 in pipe with ratcheting shear action
- 18 in tool length gives high leverage for easier cutting
- Aluminium alloy body resists corrosion on job sites
- Handles PEX, PVC, PP, PE, PB and PVDF materials
- Compact 130 mm height and 40 mm width fits tight spaces
Westward 18 in PVC Cutter
The Westward 10D468 is a ratcheting shear cutter designed for plastic piping up to 2 3/8 in diameter. It handles PEX, polyethylene, polypropylene, PVC and PVDF tubing with a high-leverage mechanism. The 17 in aluminum alloy body provides a compact reach for tight spaces. This tool suits plumbers and HVAC technicians who need clean, straight cuts on plastic pipe.
Replaces manual scissor cutters
The ratcheting action reduces hand force compared with simple shear snips, making repetitive cuts less tiring. The jump is worth it when cutting schedules of 10 or more pieces per job, or when pipe walls are thick enough to bind a basic cutter. It does not serve metal pipe, conduit or large-diameter PVC beyond the stated maximum capacity.
Easy one-hand operation
Squeeze the handles to engage the ratchet, advance the blade, then release and repeat until the cut completes. The most common issue is blade dulling after heavy use on abrasive PVDF, which increases required force. Debris buildup in the ratchet pawl can cause skipping, so wipe the mechanism clean after each session. No reaming tool is included, so a separate deburrer may be needed.
Highlights
- Cuts up to 2-3/8 in pipe with ratcheting shear action
- 18 in tool length gives high leverage for easier cutting
- Aluminium alloy body resists corrosion on job sites
- Handles PEX, PVC, PP, PE, PB and PVDF materials
- Compact 130 mm height and 40 mm width fits tight spaces
Specifications
| Brand | Westward |
|---|---|
| Type | Knives, Cutters & Snips |
Questions about this item
What pipe diameter does the 18 in PVC cutter with 2-1/2 in cap actually cut?
The ratcheting shear cuts PEX, polyethylene, polypropylene, PVC and PVDF tubing from 1/16 in up to 2 3/8 in outside diameter.
How do you engage the ratcheting shear on the 17 in tool without crushing the pipe?
Squeeze the handles fully until the ratchet clicks, release, then repeat; forcing a partial stroke bends the blade and deforms thin-wall tube.
When should the blade on the aluminum alloy body cutter be replaced?
Replace the blade when cuts leave a ragged edge or the ratchet requires noticeably more force on the same 2 3/8 in PVC.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
