We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 29mm 6-point impact socket 1/2 inch drive

Westward

Westward 1/2" Drive 29mm Metric Impact Socket 6 Pt

SKU CH-KVPK-741XE

A 29 mm, 1/2-inch-drive impact socket with a 6-point heat-treated alloy-steel design meeting ANSI B107.6 and Federal Specification GGG-W-660A

  • TypeSockets
  • 1/2" drive fits common impact wrenches
  • 29 mm metric size for large fasteners
  • 6-point opening grips flats to reduce rounding
  • Heat-treated alloy steel withstands high torque
  • Meets ANSI B107.6 and Federal Spec GGG-W-660A

Socket specification

The Westward 1/2" drive metric impact socket measures 29mm across the flats and has a 6-point opening. It is made from heat-treated alloy steel with a black finish and an overall length of 3-3/32 inches. The tool meets Federal Specification GGG-W-660A and ANSI B107.6 standards and is rated for impact use.

Intended users

This socket suits technicians and DIYers who need a standard-depth 29mm impact socket for a 1/2" drive tool. It is not for buyers who require a different metric size, a deep-well profile, or a drive size other than 1/2".

Deciding specification

The critical figure is the 29mm metric opening combined with a 1/2" square drive. Match both to the fastener and the tool you are using; if either differs, this socket will not fit.

Highlights

  • 1/2" drive fits common impact wrenches
  • 29 mm metric size for large fasteners
  • 6-point opening grips flats to reduce rounding
  • Heat-treated alloy steel withstands high torque
  • Meets ANSI B107.6 and Federal Spec GGG-W-660A

Specifications

BrandWESTWARD
TypeSockets

Questions about this item

Does the 1/2 inch drive meet Federal Specification GGG-W-660A for impact use?

Yes, the socket is impact rated and conforms to Federal Specification GGG-W-660A and ANSI B107.6 for 1/2 inch drive impact applications.

What is the overall length of this 29mm socket, and will it clear my ratchet head?

The overall length is 3-3/32 inches, a standard depth that clears most 1/2 inch ratchet and impact gun anvils.

How do I correctly install this 6 point socket onto a 29mm fastener?

Align the 6 point opening squarely on the fastener flats, press fully onto the nut or bolt until seated, then apply torque; the common error is cocking the socket at an angle before driving.

More in Hand Sockets & Ratchets

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.