Wenglor
Wenglor OTDK502A0002 photoelectric sensor PNP 500 mm IP67 electrician tool
Photoelectric sensor with 500 mm range, PNP output and IP67 housing for reliable detection in industrial environments
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- 500 mm sensing range for reliable detection
- PNP normally-open output with 200 mA switching current
- IP67-rated plastic housing withstands harsh environments
- 10…30 V DC supply voltage fits standard industrial power
- 500 Hz switching frequency enables fast response times
Industrial photoelectric sensor
The Wenglor OTDK502A0002 is a new PNP photoelectric sensor designed for industrial automation tasks. It detects objects up to 500 mm away using an infrared light source with a 5 ° opening angle. The sensor suits electricians and maintenance engineers who need reliable presence detection in harsh environments.
Supply voltage and switching limits
The unit operates from a 10...30 V DC supply and draws less than 30 mA at 24 V. Its PNP normally-open output switches up to 200 mA with a voltage drop below 2,5 V. Short-circuit, reverse-polarity and overload protection are built in, while the switching frequency reaches 500 Hz with a 1 ms response time.
IP67-rated plastic housing
The red plastic housing meets IP67 so it withstands dust and temporary immersion. Connection is via a 4-pin M12 × 1 connector, and a potentiometer allows range adjustment. Operating temperature spans -25...60 °C, and the MTTFd to EN ISO 13849-1 is 3706,54 a.
Highlights
- 500 mm sensing range for reliable detection
- PNP normally-open output with 200 mA switching current
- IP67-rated plastic housing withstands harsh environments
- 10…30 V DC supply voltage fits standard industrial power
- 500 Hz switching frequency enables fast response times
Specifications
| Brand | Wenglor |
|---|---|
| Model | OTDK502A0002 |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
Should I choose the 500 mm range version or a shorter-range model for my application?
This sensor detects objects up to 500 mm away using an infrared light source with a 5 ° opening angle. Select it when your target distance falls within that range; a shorter-range model would only be needed for closer, more precise detection.
What does the 500 Hz switching frequency mean when the sensor is installed on a production line?
At 500 Hz the sensor can complete a full detect-and-switch cycle every 2 ms, with a 1 ms response time, so it reliably tracks objects moving at typical conveyor speeds without missing pulses.
How does the M12 × 1, 4-pin connection limit the wiring options?
The 4-pin M12 connector carries the 10…30 V DC supply, the PNP normally-open output (200 mA max) and the error indicator signal. It fits standard M12 cables but cannot carry additional auxiliary contacts beyond those four pins.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
