Weller
Weller Conical Soldering Tip 0.031 In 0.8 mm
Conical Weller soldering tip with a 0.8 mm diameter for PES51, WES51 and WESD51 stations
- Selling UnitBag
- TypeConical
- Size/Dimensions1/32: Tapered
- Conical tip delivers precise heat for fine soldering
- 8 mm diameter suits detailed electronics work
- 1/32 in tapered profile reaches tight joints
- Compatible with PES51, WES51 and WESD51 stations
- New condition ensures full performance out of the box
Weller Conical Soldering Tip 0.031 In
This Weller conical soldering tip measures 0.031 inches (0.8 mm) and is designed for precision soldering tasks. It fits PES51, WES51 and WESD51 soldering stations. The tapered conical shape concentrates heat at a fine point for detailed component work. Supplied new in a bag as a single selling unit.
Suitable for electronics repair
Ideal for technicians and hobbyists who need a fine-point tip for small joints and surface-mount components. Not suited for buyers who need a chisel or bevel profile for larger pads or heavy-gauge wire. Also not for users of soldering stations outside the listed Weller models, as the fitting will not match.
Simple tip swap on compatible Weller stations
Installation requires loosening the retaining nut or sleeve on the iron, removing the old tip and seating this conical tip firmly before retightening. A common issue is a loose fit if the securing hardware is not tightened enough, which causes intermittent heating or tip drop-out during use. Ensure the iron is cool before changing tips to avoid burns.
Highlights
- Conical tip delivers precise heat for fine soldering
- 8 mm diameter suits detailed electronics work
- 1/32 in tapered profile reaches tight joints
- Compatible with PES51, WES51 and WESD51 stations
- New condition ensures full performance out of the box
Specifications
| Brand | Weller |
|---|---|
| Selling Unit | Bag |
| Type | Conical |
| Size/Dimensions | 1/32: Tapered |
Questions about this item
Which Weller soldering stations accept this 0.031 in conical tip?
The tip is listed for use with the PES51, WES51 and WESD51 stations.
Can I use this tip on a station that currently has a chisel tip installed?
Yes, the tip fits the same barrel on those models, so you can swap between conical and chisel profiles.
How do I confirm the tip is heating correctly after fitting it?
Tin the 0.8 mm conical face; a shiny, even solder coat within a few seconds shows the tip is at working temperature.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
