welldog
welldog ANT-2DBI-2PK 2-pack RP-SMA Antenna
Two RP-SMA antennas boost WiFi 2.4 GHz and 5 GHz signals for routers or wireless cards
- Omni-directional design adjusts in all directions for flexible signal coverage
- Dual-band 2.4 GHz and 5 GHz operation supports WiFi 2 networks
- RP-SMA connector fits compatible wireless routers and cards
- Two antennas in one pack provide spare or multi-device setup
- 30-day return window backed by seller-paid return shipping
Two-pack RP-SMA antennas
This two-pack of RP-SMA antennas fits WiFi 2.4 GHz and 5 GHz wireless routers or cards. The omnidirectional design adjusts in all directions to suit the signal path. Buyers who need a single high-gain directional antenna will not be served by this set. It is intended for basic coverage improvement on compatible equipment.
Omnidirectional build and RP-SMA fit
Each antenna uses a standard RP-SMA connector that screws directly onto the router or card port. The adjustable joint lets you tilt or swivel the whip without tools. Build quality is functional plastic and metal contact, made for indoor desktop or wall-mounted gear. Installations that require weather-sealed or N-type connectors cannot use these units.
Dual-band 802.11 a operation limits
The antennas cover the 5 GHz band used by 802.11 a and the 2.4 GHz band used by other WiFi 2 standards. Gain is modest at 2 dBi so range extension is limited to the same room or adjacent spaces. They do not amplify the signal, only reshape the radiation pattern. Environments with thick walls or long corridors will see little benefit.
Highlights
- Omni-directional design adjusts in all directions for flexible signal coverage
- Dual-band 2.4 GHz and 5 GHz operation supports WiFi 2 networks
- RP-SMA connector fits compatible wireless routers and cards
- Two antennas in one pack provide spare or multi-device setup
- 30-day return window backed by seller-paid return shipping
Specifications
No published specifications for this item yet.
Questions about this item
Does the RP-SMA connector work with standard WiFi 2.4 GHz and 5 GHz bands?
The RP-SMA connector is compatible with routers and cards operating on 2.4 GHz and 5 GHz bands using 802.11 a standard.
What thread size and connector type do these antennas use for mounting?
These antennas use an RP-SMA male connector with a standard threaded interface for direct attachment to compatible router or card ports.
How do I install them, and what is the common mistake to avoid?
Screw each antenna onto the RP-SMA port by hand until snug; do not use tools, as over-tightening damages the centre pin or connector threads.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
vtech VC7002 open/closed sensor surveillance security system
- Home Improvement



