Weinandianzi WN-OV5640A-MP 5MP OV5640 MIPI/DVP Camera Module 24PIN 50mm

5MP OV5640 Camera Module for ESP32-CAM

This 5MP camera module uses a 1/4.0-inch OV5640 sensor with a resolution of 2592x1944 pixels and a 70° field of view. It connects via MIPI or DVP interface and features a 24-pin flexible cable with a 50mm length. The module includes auto-focus capability with a minimum shooting distance of 0.3m and a 3.0mm focal length. It operates on a voltage range of 1.8V to 2.8V with a power consumption of 90mW active and 30µW standby.

Check ESP32-CAM Compatibility and Voltage

Verify that your ESP32-CAM soft board supports the MIPI or DVP interface and the 24-pin connector layout before ordering. Ensure your power supply can deliver a stable 1.8V to 2.8V to the module for correct operation. Confirm the physical dimensions of 8.5mm by 8.5mm fit your intended mounting location on the board. The operating temperature range is 0°C to 60°C, so consider environmental conditions for your project.

Integrates with ESP32-CAM for Embedded Vision

The module mounts directly onto an ESP32-CAM soft board using the supplied 24-pin 50mm flex cable, freeing up board space with its compact 8.5mm square footprint. It enables high-definition image capture at 5MP for computer vision, surveillance or IoT applications. The auto-focus lens simplifies setup by removing the need for manual focus adjustment. The low standby power of 30µW suits battery-powered deployments where energy efficiency is critical.