We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Weiler stem-mounted Conflex wire wheel brush 3 inch 1/4 shank 25000 RPM

Weiler

Weiler Stem-Mounted Conflex Brush 17617 3in 1/4in Shank 25000 RPM

SKU CH-3865-ZNYS3

Crimped carbon-steel wire wheel with 1/4 in shank runs at 25,000 RPM on die grinders

  • TypeGrinders
  • MaterialHAWA
  • 3 in diameter reaches tight areas
  • Crimped carbon steel wire removes burrs efficiently
  • 1/4 in shank fits die grinders directly
  • 1 in trim length balances aggression and control
  • 25,000 RPM max speed enables fast material removal

Weiler Stem-Mounted Conflex Brush 17617

This carbon-steel wire wheel brush mounts on a 1/4-inch shank for use with die grinders. The 3-inch diameter wheel uses crimped wire bristles trimmed to one inch for surface preparation tasks.

Sustained operation at 25000 RPM

The brush maintains its crimped wire structure during extended grinding sessions at the rated maximum speed. Carbon steel construction resists wear when removing rust, scale or paint from metal surfaces over long periods.

Shank-mounted interface limits

The 1/4-inch shank fits standard die grinders but cannot be used with tools requiring an arbor hole. Maximum face width of half an inch restricts the contact area on each pass across the workpiece.

Highlights

  • 3 in diameter reaches tight areas
  • Crimped carbon steel wire removes burrs efficiently
  • 1/4 in shank fits die grinders directly
  • 1 in trim length balances aggression and control
  • 25,000 RPM max speed enables fast material removal

Specifications

TypeGrinders
BrandWeiler
MaterialHAWA

Questions about this item

How hot does the Weiler 17617 brush get when running continuously at 25000 RPM?

The brush itself does not generate significant heat; heat comes from friction on the workpiece. Use appropriate speed and pressure to manage workpiece temperature.

What tool and collet size are required to mount the 1/4 in shank on a die grinder?

A die grinder with a 1/4 in collet or chuck is required to secure the 1/4 in shank of the Weiler 17617 brush.

Will the 0.014 in carbon steel wire damage softer metals like aluminium on an older bench grinder?

This brush is rated for 25000 RPM max and designed for die grinders. Using it on a slower bench grinder reduces effectiveness and carbon steel wire may contaminate aluminium.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.