Weiler
Weiler 17641 Brass Crimped Wire Wheel Brush 3 in 1/4 in Shank 20000 RPM
Brass crimped wire wheel brush with 1/4 in shank for die grinders, drill presses, pencil grinders and straight grinders, maximum speed 20,000 RPM
- TypeSanders
- Brass bristles clean soft metals without scratching
- Crimped wire design reaches uneven surfaces effectively
- 1/4 in shank fits die grinders and drills
- 20000 RPM maximum speed enables fast material removal
- 3 in diameter covers wider work area per pass
Brass crimped wire wheel brush
The Weiler 17641 is a brass crimped wire wheel brush with a 1/4 in round shank. It mounts on die grinders, drill presses, pencil grinders and straight grinders. The brush runs at up to 20,000 RPM for cleaning and surface preparation tasks.
Ideal for light deburring and brass surfaces
Suits users who need a non-ferrous brush for gentle cleaning, polishing or rust removal on softer metals without contaminating the workpiece. Not suited for heavy stock removal, aggressive scaling or work on hardened steel that requires stiffer wire.
20,000 RPM maximum operating speed
The rated top speed of 20,000 RPM determines whether your grinder can run this brush safely. Exceeding that limit risks wire breakage and injury, so verify the tool's no-load speed before fitting the brush.
Highlights
- Brass bristles clean soft metals without scratching
- Crimped wire design reaches uneven surfaces effectively
- 1/4 in shank fits die grinders and drills
- 20000 RPM maximum speed enables fast material removal
- 3 in diameter covers wider work area per pass
Specifications
| Type | Sanders |
|---|---|
| Brand | Weiler |
| Model | 17641 |
Questions about this item
Will the 1/4 in shank on the Weiler 17641 fit the collet on my older die grinder?
The brush has a 1/4 in round shank, matching the standard collet size found on most die grinders, drill presses, pencil grinders and straight grinders.
How can I confirm the brass wire wheel is running true at 20000 RPM after mounting it?
Start the tool at low speed and watch for wobble; a correctly seated 3 in brush should spin smoothly without visible run-out before you increase to the 20000 RPM maximum.
Does the Weiler 17641 package include any mounting hardware or adapters, or is the brush the only item?
The box contains the crimped brass wire wheel brush with its integral 1/4 in shank; no extra arbors, adapters or fasteners are supplied.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
