Weiler
Weiler 15523 Crimped Wire Wheel Brush 2-1/2 in 0.014 in 20000 RPM
A 2-1/2 inch crimped carbon-steel wire wheel brush with .014 inch bristles for die grinders and drills up to 20,000 RPM
- TypeSanders
- Crimped carbon-steel bristles clean carbon-steel surfaces
- 20000 RPM maximum speed matches high-speed die grinders
- 1/2 in face width covers more area per pass
- Threaded 1/2 in to 3/8 in arbor fits drills and grinders
- 014 in wire diameter balances aggression and surface finish
2-1/2 in Crimped Wire Wheel Brush
This 15523 crimped wire wheel brush is a rotary abrasive tool for surface conditioning. It mounts on die grinders, drill presses, pencil grinders and straight grinders via a threaded hole accepting 1/2 in to 3/8 in arbors. Carbon steel bristles of 0.014 in diameter provide aggressive cleaning action on carbon steel workpieces. Maximum operating speed is 20,000 RPM.
Suited for light deburring
The 2-1/2 in diameter and 1/2 in face width suit light deburring, rust removal and paint stripping on small or intricate carbon steel parts. Builders needing wider coverage or heavier material removal should look at larger diameter or knotted wire configurations not offered by this model. The fixed 0.014 in bristle diameter also limits flexibility for delicate finishing tasks.
1/2 in to 3/8 in threaded arbor compatibility
The connector is a threaded hole sized for 1/2 in to 3/8 in arbors, which decides whether the brush fits your grinder or drill press. Verify your tool's arbor diameter and thread pitch before purchase; an incorrect match prevents installation and creates a safety hazard at 20,000 RPM.
Highlights
- Crimped carbon-steel bristles clean carbon-steel surfaces
- 20000 RPM maximum speed matches high-speed die grinders
- 1/2 in face width covers more area per pass
- Threaded 1/2 in to 3/8 in arbor fits drills and grinders
- 014 in wire diameter balances aggression and surface finish
Specifications
| Type | Sanders |
|---|---|
| Brand | Weiler |
| Model | 15523 |
Questions about this item
What is the maximum operating speed of the 15523 wire wheel brush?
The brush is rated for a maximum operating speed of 20,000 RPM.
What is the threaded hole size range for mounting this brush?
The connector accepts a threaded hole size of 1/2 in to 3/8 in.
How do you correctly install the brush onto a die grinder spindle?
Thread the brush onto the spindle matching the 1/2 in to 3/8 in size and tighten securely by hand before use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
