Weiler
Weiler 13466 Knot Wire Bevel Brush 4-1/2 in 0.014 in 5/8-11 15000 RPM
Knot wire bevel brush with stainless steel bristles for angle grinders up to 15000 RPM
- TypeSanders
- Stainless-steel knots resist corrosion on carbon steel
- 4-1/2 in diameter covers broad surface area per pass
- 014 in bristle thickness balances aggression and finish
- 5/8-11 threaded arbor fits common angle grinders
- 15000 RPM max speed matches high-output tools
Stainless steel knot bevel brush
This 4-1/2 inch bevel brush uses standard twist stainless steel wire bristles measuring 0.014 inch in diameter. It mounts on an angle grinder via a 5/8-11 threaded arbor and is rated for a maximum operating speed of 15,000 RPM. The brush face is 3/8 inch wide with a 1 inch bristle length.
Carbon steel surface preparation
Suited for cleaning, deburring and edge blending on carbon steel workpieces where a stainless wire prevents contamination. The knot construction delivers aggressive cutting action for heavy scale or weld spatter removal. Not intended for fine finishing, polishing or applications requiring a softer brush face.
5/8-11 threaded arbor compatibility
The brush fits angle grinders equipped with a 5/8 inch -11 threaded spindle. Verify your tool's arbor size and maximum speed rating before installation to ensure safe operation.
Highlights
- Stainless-steel knots resist corrosion on carbon steel
- 4-1/2 in diameter covers broad surface area per pass
- 014 in bristle thickness balances aggression and finish
- 5/8-11 threaded arbor fits common angle grinders
- 15000 RPM max speed matches high-output tools
Specifications
| Type | Sanders |
|---|---|
| Brand | Weiler |
| Model | 13466 |
Questions about this item
What size threaded arbor does the 13466 knot wire bevel brush require for mounting?
The brush fits a 5/8 in. -11 threaded arbor, matching standard angle grinder spindles.
How do I install the brush onto an angle grinder, and what step is often missed?
Thread the brush onto the 5/8-11 spindle by hand, then tighten with the grinder's wrench; the step often missed is confirming the 15,000 RPM maximum speed matches the tool's rating.
When should the stainless steel knot wire bristles be replaced?
Replace the brush when the 0.014 in. diameter wires become worn, broken, or the 1 in. bristle length has shortened noticeably from use on carbon steel.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
