We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular AC adapter with 6.5 Ft power cord

WAWEIS

WAWEIS AC adapter for Whistler WS1095 WS1098 WS1065 TRX-2 13.8V

SKU CH-ANWA-PHDTH

Replacement AC adapter powers compatible Whistler scanners with 13.8 V output, 100–240 V input and a 6.5 ft cord

  • World-wide 100-240 VAC input suits travel or home use
  • 5 ft power cord reaches distant outlets easily
  • FCC, CE and RoHS certified for verified safety
  • Over-current, over-voltage and short-circuit protection guards equipment
  • 100 % compatible with Whistler WS1095 WS1098 WS1065 TRX-2 scanners

Compatible scanner models

This AC adapter replaces the original power supply for Whistler WS1095, WS1098, WS1065 and TRX-2 desktop digital scanners. It delivers a 13.8 VDC output with an input range of 100-240 VAC at 50/60 Hz. The unit is built with new components and carries FCC, CE and RoHS certifications.

Power cord and safety features

A 6.5 ft power cord provides reach from the wall outlet to the scanner. Integrated protection circuits guard against over-current, over-voltage, short-circuit and total-power fault conditions. The adapter operates on worldwide mains voltage without a separate selector switch.

Sustained operation behaviour

The adapter is designed for continuous use while the scanner monitors radio traffic for extended periods. Protection circuits remain active during long sessions to prevent overheating and electrical stress. No performance figures for peak or burst loads are supplied by the manufacturer.

Highlights

  • World-wide 100-240 VAC input suits travel or home use
  • 5 ft power cord reaches distant outlets easily
  • FCC, CE and RoHS certified for verified safety
  • Over-current, over-voltage and short-circuit protection guards equipment
  • 100 % compatible with Whistler WS1095 WS1098 WS1065 TRX-2 scanners

Specifications

No published specifications for this item yet.

Questions about this item

How do I connect the 6.5 ft power cord to my Whistler WS1095 scanner?

Plug the barrel connector into the scanner's DC input jack and the IEC end into a wall outlet; the step often missed is confirming the tip polarity matches the 13.8 V centre-positive requirement.

Which protection component will need checking after extended use on the TRX-2?

The internal smart-chip thermal fuse handles overheating protection; if the adapter shuts down under load, that fuse has likely opened and the unit must be replaced.

What voltage limit appears first when running the WS1098 continuously?

The over-voltage protection triggers at the rated 13.8 VDC ceiling, cutting output before the scanner sees any higher voltage.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.