WAWEIS
WAWEIS AC Adapter for SDM-M81B SDM-M81 18" LCD Monitor
Replacement AC adapter for 18" LCD monitors SDM-M81B and SDM-M81 with 10 ft cord and worldwide 100-240V input
- Worldwide 100-240 V input works across regions
- 10 ft cable gives flexible placement
- FCC CE RoHS certified for safety compliance
- Over-voltage short-circuit and over-current protection built in
- 100 % compatible replacement for SDM-M81B SDM-M81 monitors
WAWEIS AC Adapter for 18" LCD Monitor
This WAWEIS AC adapter replaces the original power supply for SDM-M81B and SDM-M81 18-inch LCD monitors. It accepts worldwide mains voltage from 100 to 240 VAC at 50 or 60 Hz. The unit carries FCC, CE and RoHS certifications. Total power cord length is 10 ft.
Suits owners needing a direct replacement
Ideal for users whose original adapter has failed or been lost and who need a plug-compatible unit with the same voltage and connector. Not suitable for buyers who require a different output voltage, a higher current rating or a USB-C power delivery interface. Also not intended for powering unrelated laptop models or larger displays.
Simple plug-and-play installation
Connect the mains cable to a wall outlet and the DC plug to the monitor; no drivers or configuration are required. Built-in over-current, over-voltage, short-circuit and thermal protections reduce risk of damage. The most common issue is ordering the wrong tip size, so verify the connector matches the monitor before purchase.
Highlights
- Worldwide 100-240 V input works across regions
- 10 ft cable gives flexible placement
- FCC CE RoHS certified for safety compliance
- Over-voltage short-circuit and over-current protection built in
- 100 % compatible replacement for SDM-M81B SDM-M81 monitors
Specifications
No published specifications for this item yet.
Questions about this item
What monitor models does this AC adapter support?
This adapter is compatible with the SDM-M81B and SDM-M81 18" LCD monitors.
Can I use this adapter with a monitor that originally shipped with a different voltage input?
The adapter accepts a worldwide input range of 100-240 VAC at 50/60 Hz, matching the original monitor requirements.
How do I confirm the adapter is delivering power correctly after connecting it?
The monitor should power on normally and the adapter's built-in protections (over-current, over-voltage, short-circuit) will engage automatically if any fault occurs.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



