WAWEIS
WAWEIS 230W AC Adapter for HP Compaq Omni 27 1100 Series
230W replacement power supply for HP Compaq Omni 27 all-in-one desktops with 10ft cord and safety protections
- World-wide 100-240 V input suits any mains supply
- 10 ft total cord length gives flexible desk placement
- Over-current, over-voltage, short-circuit and total-power protection guards the system
- FCC, CE and RoHS certifications confirm safety compliance
- 100 % compatible replacement for HP Compaq Omni 27 1100 series all-in-one desktops
230 W replacement adapter for HP Omni 27
This 230 W AC adapter replaces the original power supply for HP Compaq Omni 27 1100 series all-in-one desktops. It delivers 100-240 VAC input at 50/60 Hz for worldwide use. A 10 ft power cord provides flexible placement. FCC, CE and RoHS certifications confirm safety compliance.
Upgrade from a failed or missing OEM unit
The adapter serves as a direct replacement when the factory supply fails, is lost or no longer holds a stable output. It matches the original voltage and connector specification for models 27-1058, 27-1100ex, 27-1055 and 27-1054. Built-in over-current, over-voltage, short-circuit and total-power protection guards the desktop during the swap.
Powers the complete all-in-one system
Rated at 230 W, the unit comfortably runs the integrated display, processor and peripherals under normal workloads. The 10 ft cable reaches distant outlets without extension leads. Protection circuits shut down output before damage occurs if a fault develops. Not suited for devices requiring a different wattage or connector type.
Highlights
- World-wide 100-240 V input suits any mains supply
- 10 ft total cord length gives flexible desk placement
- Over-current, over-voltage, short-circuit and total-power protection guards the system
- FCC, CE and RoHS certifications confirm safety compliance
- 100 % compatible replacement for HP Compaq Omni 27 1100 series all-in-one desktops
Specifications
No published specifications for this item yet.
Questions about this item
What mains voltage range does the 230 W adapter accept?
The unit operates on 100-240 VAC at 50/60 Hz, so it works on mains supplies worldwide without a separate voltage selector.
How is the adapter connected to the Omni 27 all-in-one?
Plug the 10 ft power cord into a wall outlet, then insert the DC output connector into the desktop's power jack; the step often missed is ensuring the connector seats fully until it clicks.
When should the power cord be replaced?
Replace the cord if the insulation shows cracks, the plug pins are bent, or the adapter trips its over-current or short-circuit protection during normal use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



