WAWEIS
WAWEIS 19V 6.32A 120W AC Adapter for Asus Eee Top ET2010AGT-B017E N56VM
19 V 6.32 A 120 W replacement charger for compatible Asus all-in-one PCs with 10 ft cord and FCC, CE, RoHS certifications
- World-wide 100-240 V input works across regions
- 120 W at 19 V 6.32 A matches original power needs
- 10 ft total cord length gives flexible placement
- Over-current, over-voltage, short-circuit and total-power protections guard the system
- FCC, CE and RoHS certified for safety compliance
WAWEIS 120W AC Adapter for Asus All-in-One
This 19V 6.32A power supply replaces the original adapter for Asus Eee Top ET2010AGT-B017E and N56VM all-in-one PCs. It also fits compatible A8J, W3J, W7J, W2J, A6Ja, V1J, W2Vc and W1Vc models requiring the PA-1121-04 specification. The unit delivers 120W total output for stable operation.
Input range 100-240VAC 50/60Hz with fixed 19V output
Worldwide input voltage accepts mains from 100 to 240VAC at 50 or 60Hz without a selector switch. The adapter provides a single 19V DC rail rated at 6.32A, so devices needing a different voltage or higher current cannot use it. Over-voltage, over-current and short-circuit protection circuits limit the unit to its rated limits.
10 ft total cord length
A combined 10-foot cable run from wall socket to device reduces the need for extension leads in most desk setups. The barrel plug matches the original PA-1121-04 pinout; reversing polarity or forcing a loose fit can trigger the short-circuit protection and prevent charging. FCC, CE and RoHS certifications confirm compliance with basic safety standards.
Highlights
- World-wide 100-240 V input works across regions
- 120 W at 19 V 6.32 A matches original power needs
- 10 ft total cord length gives flexible placement
- Over-current, over-voltage, short-circuit and total-power protections guard the system
- FCC, CE and RoHS certified for safety compliance
Specifications
No published specifications for this item yet.
Questions about this item
How do I pick the right adapter for my Asus Eee Top ET2010AGT-B017E or N56VM?
Match the 19V 6.32A 120W output and the PA-1121-04 part number to your device label; this unit is listed as 100% compatible with those models and the A8J, W3J, W7J, W2J, A6Ja, V1J, W2Vc, W1Vc series.
What does the 120W rating actually deliver inside the all-in-one PC?
It supplies a steady 19 volts at up to 6.32 amps, powering the motherboard, screen and internal components of the ET2010AGT-B017E or N56VM without exceeding the adapter’s maximum capacity.
What input standard does the brick accept and what does that cap?
The unit accepts 100-240VAC at 50/60Hz worldwide, so the wall voltage never limits operation; the output is capped at 19V 6.32A 120W by the adapter’s own regulation and protection circuits.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



