WAWEIS
WAWEIS 19V 3.42A 65W AC Adapter MSI EA1060B Toshiba EA1060B-53 Rock CR500 CR600 CR620 CX600 CX70
19 V 3.42 A 65 W AC adapter with 10 ft cord, 100–240 V input and over-current, over-voltage and short-circuit protection
- World-wide 100-240 V input works across regions
- 10 ft power cord gives flexible desk placement
- Over-current, over-voltage and short-circuit protection guards hardware
- FCC, CE and RoHS certified for safety compliance
- 100 % OEM compatible with listed MSI, Toshiba and Rock models
Purpose and compatibility
This 19 V 3.42 A 65 W AC adapter replaces the original charger for MSI EA1060B, Toshiba EA1060B-53 and Rock CR500, CR600, CR620, CX600, CX70, CX500, CR720, CR420, CR400, CR610X-005EU, CR640, CR650, VR420, A6200-206US and Pro 22E laptops. It delivers the exact voltage and current those models require. Builders needing a different wattage or connector should look elsewhere.
Thermals noise and power
The unit accepts worldwide 100-240 VAC at 50/60 Hz and includes a 10 ft power cord for flexible placement. Built-in over-current, over-voltage, short-circuit and total-power protection circuits prevent damage during faults. Overheating protection with a smart chip and anti-interference isolation materials keep operation stable. The adapter runs silently with no moving parts.
Deciding specification
Output is fixed at 19 VDC and 3.42 A for 65 W total power, matching the original EA1060B specification. The barrel connector fits the listed MSI, Toshiba and Rock models without modification. Certification marks include FCC, CE and RoHS. Verify your laptop’s required voltage and tip polarity before purchase.
Highlights
- World-wide 100-240 V input works across regions
- 10 ft power cord gives flexible desk placement
- Over-current, over-voltage and short-circuit protection guards hardware
- FCC, CE and RoHS certified for safety compliance
- 100 % OEM compatible with listed MSI, Toshiba and Rock models
Specifications
No published specifications for this item yet.
Questions about this item
How do I connect the 10 ft power cord and DC plug to my MSI EA1060B without damaging the 19V 3.42A input?
Plug the IEC C7 mains lead into the adapter brick first, then insert the barrel connector firmly into the laptop's DC jack until it seats; the 100-240V 50/60Hz auto-ranging input handles any wall voltage.
Which parts of this 65W adapter will wear out first and need replacement?
The 10 ft AC cable and DC cord see repeated flexing; the internal smart-chip protection circuit and electrolytic capacitors age with heat cycles, so expect cable or brick replacement after several years.
At what point does the 65W limit trigger protection during a long gaming session on a Rock CR620?
Sustained draw above 65W activates over-current protection; the adapter will shut down until it cools and the load drops back within the 19V 3.42A rating.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



