We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular AC adapter with 10 ft power cord

WAWEIS

WAWEIS 19V 150W ac adapter 10 ft hp FSP150-ABAN1 Bestec BT-AG151EBF-H Delta ADP-150TBB Great Wall GA150S

SKU CH-9TZH-V366S

19 V 150 W AC adapter with 10 ft cord, world-wide 100-240 V input, FCC CE RoHS certified and protected against over-current, over-voltage and short-circuit

  • World-wide 100-240 VAC input works anywhere
  • 10 ft cord reaches distant outlets easily
  • FCC, CE and RoHS certified for safety
  • Over-voltage, over-current and short-circuit protection built in
  • 150 W output powers compatible HP and Intel boards

19 V 150 W AC adapter with 10 ft cord

This 19 volt, 150 watt AC adapter delivers 100 to 240 VAC input at 50 or 60 Hz for worldwide use. A ten foot power cord provides extended reach from the wall outlet to the laptop. FCC, CE and RoHS certifications confirm compliance with safety and environmental standards. It is built as a direct replacement for the listed original equipment.

Sustained load protection and thermal management

Over current, over voltage and short circuit protections guard the adapter during continuous operation. An internal smart chip monitors temperature and activates overheating protection when needed. High quality wires and isolation materials reduce interference and support stable output over long sessions. The unit is tested under strict quality control to maintain reliable performance.

Replaces FSP150-ABAN1, BT-AG151EBF-H.

This adapter matches the specifications of the original FSP, Bestec, Delta and Great Wall models for compatible HP laptops and Intel DQ77KB, DH61AG, H81TM-ITX thin Mini ITX boards. The jump is worth it when the original charger is lost, damaged or no longer holds a stable voltage. Buyers who need a higher wattage unit or a different output voltage should look elsewhere.

Highlights

  • World-wide 100-240 VAC input works anywhere
  • 10 ft cord reaches distant outlets easily
  • FCC, CE and RoHS certified for safety
  • Over-voltage, over-current and short-circuit protection built in
  • 150 W output powers compatible HP and Intel boards

Specifications

No published specifications for this item yet.

Questions about this item

How much heat or fan noise does the 150 W adapter produce when it runs continuously?

The unit has no fan and relies on passive cooling; it stays warm but not hot during all-day use thanks to over-current, over-voltage and short-circuit protection circuits.

What must I already own so the 19 V 150 W brick can power my board?

You need a device that accepts a 19 V DC input through a compatible barrel connector — such as the listed HP, Intel DQ77KB, DH61AG or H81TM-ITX boards — and a mains outlet supplying 100-240 V AC at 50/60 Hz.

Will this 150 W adapter work reliably with an older Intel DQ77KB or DH61AG motherboard I want to keep?

Yes; the adapter is specified as 100 % compatible with those boards and includes overload, overheat and short-circuit protection for safe long-term operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.