WAWEIS
WAWEIS 120W 19V 6.32A AC Adapter VivoPC F20CD-NL010T
120W 19V 6.32A AC adapter for VivoPC F20CD-NL010T desktop with 10 ft cord and FCC, CE, RoHS certifications
- 120W output powers the VivoPC F20CD-NL010T reliably
- 100-240VAC input works worldwide on 50 or 60Hz
- 10 ft cord gives flexible placement from the wall
- FCC, CE and RoHS certified for safety compliance
- Over-voltage, over-current, short-circuit and total-power protections included
Replacement 120 W AC Adapter
This 120 W adapter replaces the original power supply for the VivoPC F20CD-NL010T desktop. It delivers 19 V at 6.32 A through a 10 ft total cord length. The unit is new and built with 100 % new components for full OEM compatibility.
Upgrade from a failed or lost unit
When the original charger fails or goes missing this adapter restores full power without modification. The worldwide 100-240 VAC 50/60 Hz input means it works on any mains supply. The jump is worth it whenever the original brick is unavailable or damaged.
Sustained load protection
Over current protection, total power protection, over voltage protection and short circuit protection guard the desktop during continuous operation. Overload protection with high quality wires, overheat protection with a smart chip and anti-interference isolation keep output stable. FCC, CE and RoHS certifications confirm safety compliance.
Highlights
- 120W output powers the VivoPC F20CD-NL010T reliably
- 100-240VAC input works worldwide on 50 or 60Hz
- 10 ft cord gives flexible placement from the wall
- FCC, CE and RoHS certified for safety compliance
- Over-voltage, over-current, short-circuit and total-power protections included
Specifications
No published specifications for this item yet.
Questions about this item
What connector does the WAWEIS 120W adapter use for the VivoPC F20CD-NL010T?
The adapter plugs into the VivoPC F20CD-NL010T with its dedicated barrel connector; the 10 ft cord reaches distant sockets without strain.
How do I install the adapter, and what step is often missed?
Connect the barrel tip to the PC first, then plug the IEC cord into the brick, and finally into a 100-240VAC 50/60Hz wall outlet; skipping the brick step leaves the unit unpowered.
Which safety components may need replacement after a surge event?
The internal over-current, over-voltage and short-circuit protection circuits are single-use; if they trip, the whole 19V 6.32A adapter must be replaced.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



