We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular AC adapter with 10 ft power cord

WAWEIS

WAWEIS 120W 18.5V 6.5A AC Adapter for HP Envy 17-2010tx

SKU CH-FPQH-M1JDB

A 120W replacement charger delivers 18.5V at 6.5A for compatible HP Envy 17 laptops and includes a 10 ft power cord with multiple safety protections

  • Worldwide 100–240 V input lets you charge anywhere
  • 120 W at 18.5 V 6.5 A matches original HP Envy 17-2010tx specs
  • 10 ft total cord length gives flexible desk placement
  • FCC CE RoHS certified with over-voltage, over-current and short-circuit protection
  • 12-month warranty on 100 % new components

Compatible replacement adapter

This 120W AC adapter replaces the original charger for the HP Envy 17-2010tx and matches part numbers 608426-001 and 609941-001. It delivers 18.5V at 6.5A through a 10 ft power cord. The unit accepts worldwide input voltage from 100 to 240VAC at 50/60Hz. It is built with new components and carries FCC, CE and RoHS certification.

Thermals noise and protection

Multiple safety circuits guard the adapter during normal operation. Over-current protection, over-voltage protection, short-circuit protection and total power protection are integrated. A smart chip manages overheating protection while better isolation materials provide anti-interference performance. The supply runs without a fan, so it adds no audible noise to the workspace.

Sustained load behaviour

Strict quality-control testing verifies that the charger maintains its rated output over extended sessions. Overload protection with high-quality wires prevents damage during continuous use. Over-charge and over-discharge safeguards protect the connected battery throughout long charging cycles. The 12-month warranty covers defects in materials and workmanship.

Highlights

  • Worldwide 100–240 V input lets you charge anywhere
  • 120 W at 18.5 V 6.5 A matches original HP Envy 17-2010tx specs
  • 10 ft total cord length gives flexible desk placement
  • FCC CE RoHS certified with over-voltage, over-current and short-circuit protection
  • 12-month warranty on 100 % new components

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the 120W 18.5V 6.5A adapter and what step do people often get wrong?

Connect the DC plug firmly into the HP Envy 17-2010tx power jack, then plug the AC cord into a 100-240VAC 50/60Hz mains socket. The common mistake is not pushing the barrel connector in until it clicks, which leaves the laptop running on battery.

What maintenance or replacement will this charger need later?

The 10 ft power cord and DC cable can wear from repeated bending. Inspect them periodically for frayed insulation or a loose barrel tip; replace the whole unit if the connector becomes intermittent or the brick shows discolouration from overheating.

What limit appears first when the adapter runs at full 120W load for long periods?

Thermal protection is the first limit. The internal smart chip will shut the unit down if the brick overheats during sustained 18.5V 6.5A output, then restart once it cools.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.