WarmlyYours
WarmlyYours Snow Melt Cable 240V 4104in 0.25in Home Health Care
240 V twin-conductor cable melts snow and ice on driveways and stairs at 12 W per foot with 20 ft cold lead
- TypeHome Care Equipment
- Safely removes snow and ice without damaging decorative surfaces or landscaping
- Twin-conductor cable installs in asphalt, concrete or mortar under pavers for flexible layouts
- Generates 12 watts per lineal foot for effective melting performance
- Includes 20 foot of 14 AWG cold lead to adapt to installation needs
- CSA certified for outdoor use in the U.S. and Canada
Snow Melt Cable 240V 4104in
This heating cable is designed for snow and ice removal on residential driveways, walkways, and patios. It installs directly in asphalt, concrete, or mortar under pavers to protect decorative surfaces and landscaping from winter damage. The twin-conductor design suits unusually shaped areas where standard mats cannot fit.
12W per foot output with 4104in length
The cable generates 12 watts per lineal foot across its 4104-inch run, providing consistent heat for melting snow accumulation. It includes a 20-foot 14 AWG cold lead for flexible connection to the power supply. The system is rated for 240-volt operation and is CSA certified for outdoor use in the U.S. and Canada.
Quarter-inch diameter for shallow installation
At 0.25 inches in diameter, the cable fits into thin mortar beds or shallow saw cuts without raising the finished surface height. This low profile frees up design options for paver patterns and existing slab retrofits. The installation requires a 240V electrical circuit and a compatible activation control, which are supplied separately.
Highlights
- Safely removes snow and ice without damaging decorative surfaces or landscaping
- Twin-conductor cable installs in asphalt, concrete or mortar under pavers for flexible layouts
- Generates 12 watts per lineal foot for effective melting performance
- Includes 20 foot of 14 AWG cold lead to adapt to installation needs
- CSA certified for outdoor use in the U.S. and Canada
Specifications
| Type | Home Care Equipment |
|---|
Questions about this item
Will this 240 V cable run from a controller I already own?
The cable requires a 240 V power supply and a compatible controller rated for the 12 W per foot load; check the controller specifications before connecting.
How can I verify the cable is heating correctly after installation?
Use a clamp meter on the 14 AWG cold lead to confirm the current draw matches the 12 W per foot rating across the 4104 in. length.
Does the package include any connectors or junction boxes?
The box contains the 240 V twin‑conductor heating cable with a 20 ft 14 AWG cold lead; connectors, junction boxes and controls are sold separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
