We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
WarmlyYours slab heating mat rolled out showing twin-conductor cable grid

WarmlyYours

WarmlyYours Slab Heating Mat 240V 1.5' x 64' 96 sq.ft. 8.0A

SKU CH-WFT2-09X9H

A 96 sq.ft., 240 VAC slab heating mat delivers 20 watts per sq.ft. through cCSAus-approved twin-conductor cable for warm concrete floors

  • 240 VAC power delivers 20 watts per square foot
  • 5 ft by 64 ft mat covers 96 square feet
  • Twin-conductor cable with cCSAus approval ensures safe operation
  • 0 amp draw suits standard 240 V circuits
  • 10-year manufacturer warranty backs the heating system

Slab Heating Mat 240V 96 sq ft

This WarmlyYours slab heating mat covers 96 square feet with a 1.5 by 64 foot layout. It operates at 240 VAC and draws 8.0 amps while delivering 20 watts per square foot. The twin-conductor heating cable carries cCSAus approval. A 10-year manufacturer warranty backs the product.

Ideal for concrete floor projects

The mat suits installers adding radiant heat to polished, stamped or stained concrete slabs. It is not designed for use under other floor coverings or in wet locations beyond standard concrete applications. Buyers who need a different voltage or a smaller coverage area should look at other options.

Verify electrical supply and layout

Confirm that a 240 VAC circuit rated for at least 8.0 amps is available at the installation site. Ensure the concrete pour can accommodate the 1.5 foot width and 64 foot length without cutting the heating cable. Check local code requirements for slab heating installations before ordering.

Highlights

  • 240 VAC power delivers 20 watts per square foot
  • 5 ft by 64 ft mat covers 96 square feet
  • Twin-conductor cable with cCSAus approval ensures safe operation
  • 0 amp draw suits standard 240 V circuits
  • 10-year manufacturer warranty backs the heating system

Specifications

BrandWARMLYYOURS

Questions about this item

Does the 240 VAC slab heating mat require a dedicated 8.0 A circuit and a compatible thermostat to operate?

Yes, the mat draws 8.0 A at 240 VAC, so a dedicated circuit rated for that current and a thermostat designed for 240 V electric floor heating are needed for safe operation.

Can the 1.5' x 64' mat be cut or spliced to fit around existing plumbing or structural elements in an older concrete slab?

No, the twin-conductor heating cable must not be cut or shortened; the 96 sq.ft. layout is fixed, so plan the pour to accommodate the full mat dimensions without alterations.

How can I verify the mat is producing the rated 20 watts per sq. ft. after the concrete has cured?

Measure the resistance across the heating leads with a multimeter and compare it to the value on the product label; a reading within tolerance confirms the cable is intact and will deliver the specified output.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.