Walter Surface Technologies
Walter Surface Technologies 05Z028 Pilot Pin 3/4 to 2-3/8 In 1 In D
Pilot pin fits 3/4 to 2-3/8 inch diameters with a 1 inch depth for accurate drilling alignment
- Precision alignment for accurate drilling
- Durable construction withstands heavy use
- Compatible with 3/4 to 2-3/8 inch diameters
- 1 inch depth ensures secure fit
- Trusted Walter Surface Technologies quality
Pilot Pin 3/4 to 2-3/8 Inch Diameter
The Walter Surface Technologies pilot pin fits hole saws and cutters with a 3/4 to 2-3/8 inch diameter range. It centres the tool accurately in metal, wood or composite materials. The one inch depth suits standard pilot drilling tasks in workshop and laboratory environments.
Replaces Worn or Missing Centre Pins
A bent, broken or lost pilot pin causes the cutter to wander and damages the workpiece. Swapping in this new pin restores concentric cutting without replacing the whole hole saw assembly. The upgrade is worth it whenever the original pin no longer seats securely or shows visible wear on the tip.
Simple Press Fit Installation
The pin presses into the arbor or cutter shank by hand or with light tap, no special tools required. Ensure the receiving bore is clean and free of burrs so the pin seats fully. A loose fit or debris in the bore are the usual causes of vibration and off-centre holes.
Highlights
- Precision alignment for accurate drilling
- Durable construction withstands heavy use
- Compatible with 3/4 to 2-3/8 inch diameters
- 1 inch depth ensures secure fit
- Trusted Walter Surface Technologies quality
Specifications
| Brand | WALTER SURFACE TECHNOLOGIES |
|---|
Questions about this item
What diameter range does the 05Z028 pilot pin cover?
The pilot pin handles holes from 3/4 inch up to 2-3/8 inch in diameter.
How is the pilot pin secured during installation?
Insert the pin through the cutter and tighten the set screw until it seats firmly against the flat on the shank.
When should the 05Z028 pilot pin be replaced?
Replace the pin when the tip shows visible wear or the shank develops flats that prevent a secure lock.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
