Walter Surface Technologies
Walter Surface Technologies 05Z020 Pilot Pin
Pilot pin compatible with 3/4 to 2-3/8 inch diameters and 1-1/2 inch depth
- Precision drilling with 3/4" to 2-3/8" diameter range
- Secure alignment using 1-1/2" depth specification
- Professional-grade durability from WALTER engineering
- Immediate deployment with new condition assurance
- Manufacturer-direct sourcing for quality control
Walter 05Z020 Pilot Pin
This pilot pin is a laboratory supply component designed to guide annular cutters during drilling operations. It fits cutter diameters ranging from 3/4 inch to 2-3/8 inch with a 1-1/2 inch depth capacity. The part is supplied new from Walter Surface Technologies for professional metalworking applications.
Metalworkers needing precise cutter alignment
Technicians operating magnetic drills with compatible annular cutters will find this pin ensures accurate hole placement and efficient slug ejection. It is not suited for operators using solid twist drills or cutters outside the stated diameter range, nor for applications requiring a different pin length or diameter specification.
1-1/2 inch pilot pin depth
The 1-1/2 inch depth dimension determines whether this pin matches the cutter length and workpiece thickness in your setup. Verify that your annular cutter specification calls for this exact pilot pin depth before ordering, as an incorrect length will prevent proper cutter function and tool engagement.
Highlights
- Precision drilling with 3/4" to 2-3/8" diameter range
- Secure alignment using 1-1/2" depth specification
- Professional-grade durability from WALTER engineering
- Immediate deployment with new condition assurance
- Manufacturer-direct sourcing for quality control
Specifications
| Brand | WALTER |
|---|
Questions about this item
What size hole cutter does the 05Z020 pilot pin fit?
The 05Z020 pilot pin is designed for hole cutters with a 3/4 inch to 2-3/8 inch diameter range and a 1-1/2 inch depth.
Can this pilot pin be used with my existing magnetic drill press?
Yes, the 05Z020 pilot pin works with standard magnetic drill presses that accept 3/4 inch shank annular cutters.
How do I confirm the pilot pin is correctly seated before drilling?
The pilot pin should extend past the cutter teeth and retract smoothly when pressed against the workpiece, indicating proper spring function.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
