Walter Surface Technologies
Walter Surface Technologies 05H314 Core Cutter Universal Shank 7/8"x2
Core cutter with universal shank drills precise 7/8-inch holes to a 2-inch depth
- Core cutter designed for universal shank compatibility
- 7/8 inch by 2 inch dimensions for precise cuts
- New condition ensures reliable out-of-box performance
- Walter Surface Technologies branding indicates professional quality
- Suitable for laboratory supply applications requiring accuracy
Core Cutter 7/8"x2
This Walter Surface Technologies core cutter uses a universal shank and measures 7/8 inch by 2 inches. It is built for laboratory and hardware tasks that require a standardised shank fit. The tool is supplied new and ships directly from the manufacturer.
Sustained Cutting Behaviour
The universal shank maintains alignment during extended cutting cycles, reducing drift when the tool is held under continuous load. Consistent engagement helps preserve hole quality over repeated operations without the vibration spikes seen in short-burst use.
Pre-Order Compatibility Check
Verify that your drive unit accepts a universal shank of this profile before ordering. Confirm the chuck or collet can secure the shank diameter without adapters. Buyers who need a different shank style or a non-standard diameter should look elsewhere.
Highlights
- Core cutter designed for universal shank compatibility
- 7/8 inch by 2 inch dimensions for precise cuts
- New condition ensures reliable out-of-box performance
- Walter Surface Technologies branding indicates professional quality
- Suitable for laboratory supply applications requiring accuracy
Specifications
| Brand | WALTER |
|---|
Questions about this item
How much heat or vibration does the 05H314 core cutter generate during continuous drilling?
The universal shank design transfers torque directly to the drill motor, so heat and vibration depend on the host tool's speed setting and the material being cut rather than on the cutter itself.
What drill chuck or arbor is required to hold the 7/8" universal shank?
Any standard 1/2 inch or larger drill chuck that accepts a straight round shank will secure the 7/8" x 2" shank; no proprietary arbor or adapter is needed.
Will the 05H314 core cutter fit a magnetic drill press that uses a 3/4" Weldon shank?
No — the cutter has a plain 7/8" universal shank, so it only fits chucks that grip a smooth round shaft; it will not engage a Weldon flat or quick-change collar.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
