Walter Surface Technologies
Walter Surface Technologies 05H012 Core Cutter Universal Shank 3/4" x 1
Core cutter with universal shank, 3/4 inch by 1 inch, for precise laboratory boring
- Universal shank fits multiple machines for quick changeovers
- 3/4 inch by 1 inch core size targets precise material removal
- WALTER brand signals professional-grade durability in lab use
- New condition ensures full factory performance from first cut
- Manufacturer-direct shipping on orders over $75 reduces handling steps
Core Cutter Universal Shank
The Walter Surface Technologies 05H012 Core Cutter Universal Shank is a laboratory supply tool built for precision cutting tasks. It suits technicians and engineers who need a reliable shank for core drilling applications in workshop or lab environments.
Thermals noise and power draw
As a non-powered hand tool accessory, this core cutter generates no operational heat, noise, or electrical power draw. Its performance depends entirely on the drive system used, so thermal and acoustic characteristics are determined by the host equipment rather than the shank itself.
Build fit and clearance
The 3/4-inch by 1-inch universal shank fits compatible drive units without proprietary adapters, freeing up tool-changer slots for other accessories. Buyers who need a different shank diameter or a longer cutting depth cannot use this model. Orders of 75 units or more ship free from the manufacturer.
Highlights
- Universal shank fits multiple machines for quick changeovers
- 3/4 inch by 1 inch core size targets precise material removal
- WALTER brand signals professional-grade durability in lab use
- New condition ensures full factory performance from first cut
- Manufacturer-direct shipping on orders over $75 reduces handling steps
Specifications
| Brand | WALTER |
|---|
Questions about this item
How do I install the 3/4" x 1" core cutter into my drill chuck, and what step is often missed?
Insert the universal shank fully into the chuck and tighten all three jaws evenly; the step often missed is verifying the shank seats past the 5 mm mark before locking.
What maintenance or replacement will this core cutter need after repeated use?
The cutting edges dull over time; replace the cutter when holes exceed 12 mm diameter tolerance or when feed force increases noticeably.
What limit appears first during sustained drilling with this tool?
Heat buildup at the tip becomes the limiting factor; pause every 75 seconds to let the cutter cool and prevent premature wear.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
