Walter Surface Technologies
Walter Surface Technologies 05E308 Core Cutter Universal Shank 1/2" x 2
Core cutter with universal shank for 1/2 inch by 2 inch cutting applications
- Universal shank fits multiple machines for flexible setup
- 1/2 inch by 2 inch cutting size handles standard lab tasks
- Core cutter design removes material cleanly with each pass
- New condition delivers full factory performance right out of the box
- WALTER brand backs the tool with trusted industrial quality
Walter Core Cutter 1/2" Shank
The Walter 05E308 is a core cutter designed with a universal shank for broad compatibility. It suits technicians and mechanics who need a reliable tool for creating precise holes in metal or other materials. The 1/2 inch by 2 inch dimensions define the cutting capacity for specific applications.
1/2" x 2" cutting dimensions
The single specification that determines fit is the 1/2 inch diameter by 2 inch cutting depth. This exact size must match the hole requirement for the fastener or fitting being installed. Verify the target hole size against these figures before selecting this cutter.
Universal shank fits multiple drives
The universal shank design allows the cutter to be secured in various drill chucks or magnetic drill adapters without a proprietary interface. This flexibility frees the operator from needing brand-specific arbors. The tool arrives new and ready for immediate use in the workshop.
Highlights
- Universal shank fits multiple machines for flexible setup
- 1/2 inch by 2 inch cutting size handles standard lab tasks
- Core cutter design removes material cleanly with each pass
- New condition delivers full factory performance right out of the box
- WALTER brand backs the tool with trusted industrial quality
Specifications
| Brand | WALTER |
|---|
Questions about this item
How does the 1/2" x 2" size translate when the cutter is mounted in a drill?
The 1/2" diameter matches the universal shank so it fits standard chucks, while the 2" cutting depth sets the maximum hole depth per plunge.
What does the universal shank accept in terms of drive connection?
The universal shank fits 1/2" drill chucks and quick-change adapters without an additional arbor.
What clearance is needed around the 1/2" cutter body for chip ejection?
Allow at least the cutter diameter plus a small gap so chips can escape the 2" deep bore during operation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
