Walter Surface Technologies
Walter Surface Technologies 01M612 Prentice Drill Bit 1-3/16in
Heavy-duty cobalt blend drill bit with 135-degree point drills mild steel, non-ferrous and stainless steel in portable drills, drill presses or magnetic base drills with ½-inch chuck capacity
- TypeElectric Drills
- Drills more holes per sharpening with extra-hard cobalt-blend tips
- 135-degree point geometry starts holes without pre-drilling
- Three flats on shank prevent slippage in half-inch chucks
- Heavy-duty construction handles mild steel, stainless and non-ferrous metals
- 1-3/16 inch diameter with 3-1/8 inch flute and 6 inch overall length
1-3/16 inch Prentice drill bit
The Walter Surface Technologies 01M612 is a heavy-duty cobalt-blend bit built for 1/2 inch chucks on portable drills, drill presses and magnetic-base machines. It targets metalworkers who need a single large-diameter cutter for mild steel, non-ferrous alloys and stainless steel.
135 degree point and 1/2 inch shank
The 135 degree split point eliminates the need for a pilot hole in many materials, while three flats on the shank stop the bit from slipping inside the chuck. These geometry limits mean the bit works only where a 1/2 inch capacity chuck is available.
3-1/8 inch flute and 6 inch overall length
The 3-1/8 inch flute clears chips from holes up to that depth in one pass, and the 6 inch overall length gives reach through thick plate or stacked workpieces. Beyond that flute length chips can pack, so deeper holes require peck drilling or a longer bit.
Highlights
- Drills more holes per sharpening with extra-hard cobalt-blend tips
- 135-degree point geometry starts holes without pre-drilling
- Three flats on shank prevent slippage in half-inch chucks
- Heavy-duty construction handles mild steel, stainless and non-ferrous metals
- 1-3/16 inch diameter with 3-1/8 inch flute and 6 inch overall length
Specifications
| Brand | WALTER SURFACE TECHNOLOGIES |
|---|---|
| Type | Electric Drills |
Questions about this item
Which diameter should I choose for a 1-3/16in hole?
This bit is a single size with a 1-3/16in drill diameter, 3-1/8in flute length and 6in overall length, so it matches that exact hole requirement.
What does the 135 degree point angle mean when I am drilling?
The 135deg point geometry eliminates the need for pre-drilling and lets the bit start on contact in mild steel, non-ferrous metal and stainless steel.
Will the 1/2in shank with three flats fit my drill press chuck?
Yes, the 1/2in shank with three flats is designed for portable drills, drill presses and magnetic base drills that have a 1/2in chuck capacity, and the flats prevent slippage.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
